Performance Prediction and Optimization of Nanofluid-Based PV/T Using Numerical Simulation and Response Surface Methodology
Nanomaterials · 28.04.2024 · 14 (9) · 774
DOI: 10.3390/nano14090774 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 28.04.2024. Verfasst von Sreehari Sreekumar und 4 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Sustainable Technologies (CST), Belfast School of Architecture and the Built Environment, Ulster University, Belfast BT15 1ED, Northern Ir…. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ulster University, Built Environment Research Institute (BERI), Ulster University.
Abstract (Originalsprache)
A numerical investigation was carried out in ANSYS Fluent® on a photovoltaic/thermal (PV/T) system with MXene/water nanofluid as heat transfer fluid (HTF). The interaction of different operating parameters (nanofluid mass fraction, mass flow rate, inlet temperature and incident radiation) on the output response of the system (thermal efficiency, electrical efficiency, thermal exergy efficiency, and electrical exergy efficiency) was studied using a predictive model generated using response surface methodology (RSM). The analysis of variance (ANOVA) method was used to evaluate the significance of input parameters affecting the energy and exergy efficiencies of the nanofluid-based PV/T system. The nanofluid mass flow rate was discovered to be having an impact on the thermal efficiency of the system. Electrical efficiency, thermal exergy efficiency, and electrical exergy efficiency were found to be greatly influenced by incident solar radiation. The percentage contribution of each factor on the output response was calculated. Input variables were optimized using the desirability function to maximize energy and exergy efficiency. The developed statistical model generated an optimum value for the mass flow rate (71.84 kgh−1), the mass fraction (0.2 wt%), incident radiation (581 Wm−2), and inlet temperature (20 °C). The highest overall energy and exergy efficiency predicted by the model were 81.67% and 18.6%, respectively.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centre for Sustainable Technologies (CST), Belfast School of Architecture and the Built Environment, Ulster University, Belfast BT15 1ED, Northern Ireland, UK.
- Nanotechnology and Integrated Bio-Engineering Centre (NIBEC), Ulster University, Belfast BT15 1ED, Northern Ireland, UK.
ORCID-Profile: Sreehari Sreekumar, Supriya Chakrabarti, Neil Hewitt, Jayanta Deb Mondol
Förderung
- Ulster University
- Built Environment Research Institute (BERI), Ulster University
Zitieren
APA
Sreekumar, S., Chakrabarti, S., Hewitt, N., Mondol, J. D., & Shah, N. (2024). Performance Prediction and Optimization of Nanofluid-Based PV/T Using Numerical Simulation and Response Surface Methodology. Nanomaterials, 14(9), 774. https://doi.org/10.3390/nano14090774
Vancouver
Sreekumar S, Chakrabarti S, Hewitt N, Mondol JD, Shah N. Performance Prediction and Optimization of Nanofluid-Based PV/T Using Numerical Simulation and Response Surface Methodology. Nanomaterials. 2024;14(9):774. doi:10.3390/nano14090774
BibTeX
@article{Sreekumar2024,
author = {Sreekumar, Sreehari and Chakrabarti, Supriya and Hewitt, Neil and Mondol, Jayanta Deb and Shah, Nikhilkumar},
title = {Performance Prediction and Optimization of Nanofluid-Based PV/T Using Numerical Simulation and Response Surface Methodology},
journal = {Nanomaterials},
year = {2024},
volume = {14},
number = {9},
pages = {774},
doi = {10.3390/nano14090774}
}
EUVIMED