EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Dual-Channel MoS2-Based Selective Gas Sensor for Volatile Organic Compounds

Esra Kuş, Gülay Altındemir, Yusuf Kerem Bostan iD, Cihat Taşaltın, Ayse Erol iD, Yue Wang iD, Fahrettin Sarcan iD

Nanomaterials · 05.04.2024 · 14 (7) · 633

DOI: 10.3390/nano14070633 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 05.04.2024. Verfasst von Esra Kuş und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Faculty of Science, Istanbul University, Vezneciler, Istanbul 34134, Turkey. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Royal Academy of Engineering, Istanbul University, Scientific and Technological Research Council of Turkey.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Significant progress has been made in two-dimensional material-based sensing devices over the past decade. Organic vapor sensors, particularly those using graphene and transition metal dichalcogenides as key components, have demonstrated excellent sensitivity. These sensors are highly active because all the atoms in the ultra-thin layers are exposed to volatile compounds. However, their selectivity needs improvement. We propose a novel gas-sensing device that addresses this challenge. It consists of two side-by-side sensors fabricated from the same active material, few-layer molybdenum disulfide (MoS₂), for detecting volatile organic compounds like alcohol, acetone, and toluene. To create a dual-channel sensor, we introduce a simple step into the conventional 2D material sensor fabrication process. This step involves treating one-half of the few-layer MoS₂ using ultraviolet–ozone (UV-O3) treatment. The responses of pristine few-layer MoS₂ sensors to 3000 ppm of ethanol, acetone, and toluene gases are 18%, 3.5%, and 49%, respectively. The UV-O3-treated few-layer MoS₂-based sensors show responses of 13.4%, 3.1%, and 6.7%, respectively. This dual-channel sensing device demonstrates a 7-fold improvement in selectivity for toluene gas against ethanol and acetone. Our work sheds light on understanding surface processes and interaction mechanisms at the interface between transition metal dichalcogenides and volatile organic compounds, leading to enhanced sensitivity and selectivity.

Schlagwörter

Stichwörter der Autor:innen

2D materialsGas sensorMoS2TMDsUV ozoneVOCsurface functionalizationvolatile organic compounds

Autor:innen und Institutionen

  • Department of Physics, Faculty of Science, Istanbul University, Vezneciler, Istanbul 34134, Turkey.
  • Materials Institute, TUBITAK Marmara Research Center, Gebze, Kocaeli 41470, Turkey.
  • Department of Physics, School of Physics, Engineering and Technology, University of York, York YO10 5DD, UK.

ORCID-Profile: Yusuf Kerem Bostan, Ayse Erol, Yue Wang, Fahrettin Sarcan

Förderung

  • Royal Academy of Engineering
  • Istanbul University
  • Scientific and Technological Research Council of Turkey
  • Scientific Research Projects Coordination Unit of Istanbul University
  • Scientific and Technological Research Council of Turkey (TUBITAK) project

Zitieren

APA

Kuş, E., Altındemir, G., Bostan, Y. K., Taşaltın, C., Erol, A., Wang, Y., & Sarcan, F. (2024). A Dual-Channel MoS2-Based Selective Gas Sensor for Volatile Organic Compounds. Nanomaterials, 14(7), 633. https://doi.org/10.3390/nano14070633

Vancouver

Kuş E, Altındemir G, Bostan YK, Taşaltın C, Erol A, Wang Y, et al. A Dual-Channel MoS2-Based Selective Gas Sensor for Volatile Organic Compounds. Nanomaterials. 2024;14(7):633. doi:10.3390/nano14070633

BibTeX
@article{Ku2024,
  author = {Kuş, Esra and Altındemir, Gülay and Bostan, Yusuf Kerem and Taşaltın, Cihat and Erol, Ayse and Wang, Yue and Sarcan, Fahrettin},
  title = {A Dual-Channel MoS2-Based Selective Gas Sensor for Volatile Organic Compounds},
  journal = {Nanomaterials},
  year = {2024},
  volume = {14},
  number = {7},
  pages = {633},
  doi = {10.3390/nano14070633}
}
Kostenlos starten →