EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication and Characterization of a Lead-Free Cesium Bismuth Iodide Perovskite through Antisolvent-Assisted Crystallization

Salma Maneno Masawa, Chenxu Zhao, Jing Liu, Jia Xu, Jianxi Yao

Nanomaterials · 02.04.2024 · 14 (7) · 626

DOI: 10.3390/nano14070626 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 02.04.2024. Verfasst von Salma Maneno Masawa und 4 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Laboratory of Energy and Clean Utilization, North China Electric Power University, Beijing 102206, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National Natural Science Foundation of China, The Hebei Province Key Research and Development Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cesium bismuth iodide perovskite material offers good stability toward ambient conditions and has potential optoelectronic characteristics. However, wide bandgap, absorber surface roughness, and poor surface coverage with pinholes are among the key impediments to its adoption as a photovoltaic absorber material. Herein, bandgap modification and the tailoring of surface morphology have been performed through molar ratio variation and antisolvent treatment, whereby type III antisolvent (toluene) based on Hansen space has been utilized. XRD and Raman spectroscopy analyses confirm the formation of a 0D/2D mixed dimensional structure with improved optoelectronic properties when the molar ratio of CsI/BiI3 was adjusted from 1.5:1 to 1:1.5. The absorption results and Tauc plot determination show that the fabricated film has a lower bandgap of 1.80 eV. TRPL analysis reveals that the film possesses a very low charge carrier lifetime of 0.94 ns, suggesting deep defects. Toluene improves the charge carrier lifetime to 1.89 ns. The average grain size also increases from 323.26 nm to 444.3 nm upon toluene addition. Additionally, the inclusion of toluene results in a modest improvement in PCE, from 0.23% to 0.33%.

Schlagwörter

Stichwörter der Autor:innen

all-inorganic perovskiteantisolventcesium bismuth iodidelead freesolar cell

Autor:innen und Institutionen

  • Beijing Laboratory of Energy and Clean Utilization, North China Electric Power University, Beijing 102206, China.
  • Department of Petroleum and Energy Engineering, College of Earth Sciences and Engineering, The University of Dodoma, Dodoma 41218, Tanzania.
  • State Key Laboratory of Alternate Electrical Power System, North China Electric Power University, Beijing 102206, China.

Förderung

  • The National Natural Science Foundation of China
  • The Hebei Province Key Research and Development Project

Zitieren

APA

Masawa, S. M., Zhao, C., Liu, J., Xu, J., & Yao, J. (2024). Fabrication and Characterization of a Lead-Free Cesium Bismuth Iodide Perovskite through Antisolvent-Assisted Crystallization. Nanomaterials, 14(7), 626. https://doi.org/10.3390/nano14070626

Vancouver

Masawa SM, Zhao C, Liu J, Xu J, Yao J. Fabrication and Characterization of a Lead-Free Cesium Bismuth Iodide Perovskite through Antisolvent-Assisted Crystallization. Nanomaterials. 2024;14(7):626. doi:10.3390/nano14070626

BibTeX
@article{Masawa2024,
  author = {Masawa, Salma Maneno and Zhao, Chenxu and Liu, Jing and Xu, Jia and Yao, Jianxi},
  title = {Fabrication and Characterization of a Lead-Free Cesium Bismuth Iodide Perovskite through Antisolvent-Assisted Crystallization},
  journal = {Nanomaterials},
  year = {2024},
  volume = {14},
  number = {7},
  pages = {626},
  doi = {10.3390/nano14070626}
}
Kostenlos starten →