EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of an Overshoot Layer on the Morphological, Structural, Strain, and Transport Properties of InAs Quantum Wells

Omer Arif iD, Laura Canal, Elena Ferrari iD, Claudio Ferrari iD, Laura Lazzarini iD, Lucia Nasi iD, Alessandro Paghi iD, Stefan Heun iD, Lucia Sorba iD

Nanomaterials · 27.03.2024 · 14 (7) · 592

DOI: 10.3390/nano14070592 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 27.03.2024. Verfasst von Omer Arif und 8 weiteren Autor:innen. Beteiligte Einrichtung: NEST, Istituto Nanoscienze-CNR and Scuola Normale Superiore, Piazza S. Silvestro 12, I-56127 Pisa, Italy. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Universities and Research, National Research Council, PNRR MUR.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

InAs quantum wells (QWs) are promising material systems due to their small effective mass, narrow bandgap, strong spin–orbit coupling, large g-factor, and transparent interface to superconductors. Therefore, they are promising candidates for the implementation of topological superconducting states. Despite this potential, the growth of InAs QWs with high crystal quality and well-controlled morphology remains challenging. Adding an overshoot layer at the end of the metamorphic buffer layer, i.e., a layer with a slightly larger lattice constant than the active region of the device, helps to overcome the residual strain and provides optimally relaxed lattice parameters for the QW. In this work, we systematically investigated the influence of overshoot layer thickness on the morphological, structural, strain, and transport properties of undoped InAs QWs on GaAs(100) substrates. Transmission electron microscopy reveals that the metamorphic buffer layer, which includes the overshoot layer, provides a misfit dislocation-free InAs QW active region. Moreover, the residual strain in the active region is compressive in the sample with a 200 nm-thick overshoot layer but tensile in samples with an overshoot layer thicker than 200 nm, and it saturates to a constant value for overshoot layer thicknesses above 350 nm. We found that electron mobility does not depend on the crystallographic directions. A maximum electron mobility of 6.07 × 105 cm2/Vs at 2.6 K with a carrier concentration of 2.31 × 1011 cm−2 in the sample with a 400 nm-thick overshoot layer has been obtained.

Schlagwörter

Stichwörter der Autor:innen

III–V materialsInAselectrical propertieshigh-resolution X-ray diffractionmetamorphic buffer layersmolecular beam epitaxyquantum wellssemiconductorsstrainstructural properties

Autor:innen und Institutionen

  • NEST, Istituto Nanoscienze-CNR and Scuola Normale Superiore, Piazza S. Silvestro 12, I-56127 Pisa, Italy.
  • Istituto dei Materiali per l'Elettronica ed il Magnetismo, Consiglio Nazionale delle Ricerche (IMEM-CNR), Parco Area delle Scienze 37/A, I-43124 Parma, Italy.

ORCID-Profile: Omer Arif, Elena Ferrari, Claudio Ferrari, Laura Lazzarini, Lucia Nasi, Alessandro Paghi, Stefan Heun, Lucia Sorba

Förderung

  • Ministry of Education, Universities and Research
  • National Research Council
  • PNRR MUR
  • National Infrastructure of the National Research Council for quantum simulations and calculations “PASQUA”

Zitieren

APA

Arif, O., Canal, L., Ferrari, E., Ferrari, C., Lazzarini, L., Nasi, L., Paghi, A., Heun, S., & Sorba, L. (2024). Influence of an Overshoot Layer on the Morphological, Structural, Strain, and Transport Properties of InAs Quantum Wells. Nanomaterials, 14(7), 592. https://doi.org/10.3390/nano14070592

Vancouver

Arif O, Canal L, Ferrari E, Ferrari C, Lazzarini L, Nasi L, et al. Influence of an Overshoot Layer on the Morphological, Structural, Strain, and Transport Properties of InAs Quantum Wells. Nanomaterials. 2024;14(7):592. doi:10.3390/nano14070592

BibTeX
@article{Arif2024,
  author = {Arif, Omer and Canal, Laura and Ferrari, Elena and Ferrari, Claudio and Lazzarini, Laura and Nasi, Lucia and Paghi, Alessandro and Heun, Stefan and Sorba, Lucia},
  title = {Influence of an Overshoot Layer on the Morphological, Structural, Strain, and Transport Properties of InAs Quantum Wells},
  journal = {Nanomaterials},
  year = {2024},
  volume = {14},
  number = {7},
  pages = {592},
  doi = {10.3390/nano14070592}
}
Kostenlos starten →