Effect of Deposition Working Power on Physical Properties of RF-Sputtered CdTe Thin Films for Photovoltaic Applications
Nanomaterials · 18.03.2024 · 14 (6) · 535
DOI: 10.3390/nano14060535 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 18.03.2024. Verfasst von Ana-Maria Răduță und 9 weiteren Autor:innen. Beteiligte Einrichtung: R&D Center for Materials and Electronic & Optoelectronic Devices (MDEO), Faculty of Physics, University of Bucharest, Atomiștilor Street 405, 077125 …. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The main objective of this study was to determine the variation in the properties of cadmium telluride (CdTe) thin films deposited on a p-type Si substrate by the radio frequency magnetron sputtering technique at four different working powers (70 W, 80 W, 90 W, and 100 W). The substrate temperature, working pressure, and deposition time during the deposition process were kept constant at 220 °C, 0.46 Pa, and 30 min, respectively. To study the structural, morphological, and optical properties of the CdTe films grown under the mentioned experimental conditions, X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and optical spectroscopy were used. For a better analysis of the films’ structural and optical properties, a group of films were deposited onto optical glass substrates under similar deposition conditions. The electrical characterisation of Ag/CdTe/Al “sandwich” structures was also performed using current–voltage characteristics in the dark at different temperatures. The electrical measurements allowed the identification of charge transport mechanisms through the structure. New relevant information released by the present study points towards 90 W RF power as the optimum for obtaining a high crystallinity of ~1 μm nanostructured thin films deposited onto p-Si and optical glass substrates with optical and electrical properties that are suitable for use as absorber layers. The obtained high-quality CdTe nanostructured thin films are perfectly suitable for use as absorbers in CdTe thin-film photovoltaic cells.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- R&D Center for Materials and Electronic & Optoelectronic Devices (MDEO), Faculty of Physics, University of Bucharest, Atomiștilor Street 405, 077125 Măgurele, Ilfov, Romania.
- National Institute for Research and Development in Microtechnologies IMT-Bucharest, 023573 Voluntari, Ilfov, Romania.
- Institute of Condensed Matter and Nanosciences (IMCN), Université catholique de Louvain (UCLouvain), Place Croix du Sud 1, B-1348 Louvain-la-Neuve, Belgium.
- Center of Materials Technology and Photonics, School of Engineering, Hellenic Mediterranean University, 71410 Heraklion, Greece.
- Academy of Romanian Scientists (AOSR), Ilfov Street 3, 050045 Bucharest, Romania.
ORCID-Profile: Ana-Maria Răduță, Ana-Maria Panaitescu, Sorina Iftimie, Vlad-Andrei Antohe, Ovidiu Toma, Mirela Petruta Suchea, Ștefan Antohe
Zitieren
APA
Răduță, A. M., Panaitescu, A. M., Manica, M., Iftimie, S., Antohe, V. A., Toma, O., Radu, A., Ion, L., Suchea, M. P., & Antohe, Ș. (2024). Effect of Deposition Working Power on Physical Properties of RF-Sputtered CdTe Thin Films for Photovoltaic Applications. Nanomaterials, 14(6), 535. https://doi.org/10.3390/nano14060535
Vancouver
Răduță AM, Panaitescu AM, Manica M, Iftimie S, Antohe VA, Toma O, et al. Effect of Deposition Working Power on Physical Properties of RF-Sputtered CdTe Thin Films for Photovoltaic Applications. Nanomaterials. 2024;14(6):535. doi:10.3390/nano14060535
BibTeX
@article{Rdu2024,
author = {Răduță, Ana-Maria and Panaitescu, Ana-Maria and Manica, Marina and Iftimie, Sorina and Antohe, Vlad-Andrei and Toma, Ovidiu and Radu, Adrian and Ion, Lucian and Suchea, Mirela Petruta and Antohe, Ștefan},
title = {Effect of Deposition Working Power on Physical Properties of RF-Sputtered CdTe Thin Films for Photovoltaic Applications},
journal = {Nanomaterials},
year = {2024},
volume = {14},
number = {6},
pages = {535},
doi = {10.3390/nano14060535}
}
EUVIMED