EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Energy Storage Performance of Electrode Materials Derived from Manganese Metal–Organic Frameworks

Gyeongbeom Ryoo, Seon Kyung Kim, Do Kyung Lee iD, Young-Jin Kim iD, Yoon Soo Han, Kyung-Hye Jung iD

Nanomaterials · 11.03.2024 · 14 (6) · 503

DOI: 10.3390/nano14060503 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 11.03.2024. Verfasst von Gyeongbeom Ryoo und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Advanced Materials and Chemical Engineering, Daegu Catholic University, Gyeonsan-si 38430, Gyeonbuk, Republic of Korea. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Regional Innovation Strategy (RIS), Korean government (MSIT), Ministry Education (MOE).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal–organic frameworks (MOFs) are porous materials assembled using metal and organic linkers, showing a high specific surface area and a tunable pore size. Large portions of metal open sites in MOFs can be exposed to electrolyte ions, meaning they have high potential to be used as electrode materials in energy storage devices such as supercapacitors. Also, they can be easily converted into porous metal oxides by heat treatment. In this study, we obtained high energy storage performance by preparing electrode materials through applying heat treatment to manganese MOFs (Mn-MOFs) under air. The chemical and structural properties of synthesized and thermally treated Mn-MOFs were measured by Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The surface area and porosity were investigated by nitrogen adsorption/desorption isotherms. The electrochemical properties were studied by cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) using a three-electrode cell. It was found that Mn-MOF electrodes that underwent heat treatment at 400 °C under air consisted of Mn2O3 with high specific surface area and porosity. They also showed a superior specific capacitance of 214.0 F g−1 and an energy density value of 29.7 Wh kg−1 (at 0.1 A g−1) compared to non-treated Mn-MOFs.

Schlagwörter

Stichwörter der Autor:innen

manganese oxidemetal–organic frameworkspseudocapacitorssupercapacitorsthermal treatment

Autor:innen und Institutionen

  • Department of Advanced Materials and Chemical Engineering, Daegu Catholic University, Gyeonsan-si 38430, Gyeonbuk, Republic of Korea.

ORCID-Profile: Do Kyung Lee, Young-Jin Kim, Kyung-Hye Jung

Förderung

  • Regional Innovation Strategy (RIS)
  • Korean government (MSIT)
  • Ministry Education (MOE)

Zitieren

APA

Ryoo, G., Kim, S. K., Lee, D. K., Kim, Y. J., Han, Y. S., & Jung, K. H. (2024). Energy Storage Performance of Electrode Materials Derived from Manganese Metal–Organic Frameworks. Nanomaterials, 14(6), 503. https://doi.org/10.3390/nano14060503

Vancouver

Ryoo G, Kim SK, Lee DK, Kim YJ, Han YS, Jung KH. Energy Storage Performance of Electrode Materials Derived from Manganese Metal–Organic Frameworks. Nanomaterials. 2024;14(6):503. doi:10.3390/nano14060503

BibTeX
@article{Ryoo2024,
  author = {Ryoo, Gyeongbeom and Kim, Seon Kyung and Lee, Do Kyung and Kim, Young-Jin and Han, Yoon Soo and Jung, Kyung-Hye},
  title = {Energy Storage Performance of Electrode Materials Derived from Manganese Metal–Organic Frameworks},
  journal = {Nanomaterials},
  year = {2024},
  volume = {14},
  number = {6},
  pages = {503},
  doi = {10.3390/nano14060503}
}
Kostenlos starten →