Dimensions of Cellulose Nanocrystals from Cotton and Bacterial Cellulose: Comparison of Microscopy and Scattering Techniques
Nanomaterials · 29.02.2024 · 14 (5) · 455
DOI: 10.3390/nano14050455 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 29.02.2024. Verfasst von Vladimir Grachev und 5 weiteren Autor:innen. Beteiligte Einrichtung: Sustainable Materials Lab, Department of Chemical Engineering, KU Leuven, Campus Kulak Kortrijk, Etienne Sabbelaan 53, 8500 Kortrijk, Belgium. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Foundation - Flanders, KU Leuven, Research Foundation Flanders.
Abstract (Originalsprache)
Different microscopy and scattering methods used in the literature to determine the dimensions of cellulose nanocrystals derived from cotton and bacterial cellulose were compared to investigate potential bias and discrepancies. Atomic force microscopy (AFM), small-angle X-ray scattering (SAXS), depolarized dynamic light scattering (DDLS), and static light scattering (SLS) were compared. The lengths, widths, and heights of the particles and their respective distributions were determined by AFM. In agreement with previous work, the CNCs were found to have a ribbon-like shape, regardless of the source of cellulose or the surface functional groups. Tip broadening and agglomeration of the particles during deposition cause AFM-derived lateral dimensions to be systematically larger those obtained from SAXS measurements. The radius of gyration determined by SLS showed a good correlation with the dimensions obtained by AFM. The hydrodynamic lateral dimensions determined by DDLS were found to have the same magnitude as either the width or height obtained from the other techniques; however, the precision of DDLS was limited due to the mismatch between the cylindrical model and the actual shape of the CNCs, and to constraints in the fitting procedure. Therefore, the combination of AFM and SAXS, or microscopy and small-angle scattering, is recommended for the most accurate determination of CNC dimensions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Sustainable Materials Lab, Department of Chemical Engineering, KU Leuven, Campus Kulak Kortrijk, Etienne Sabbelaan 53, 8500 Kortrijk, Belgium.
- Laboratory for Soft Matter Physics and Biophysics, Department of Physics and Astronomy, KU Leuven, Celestijnenlaan 200D Box 2416, 3001 Leuven, Belgium.
- Institute for Biomacromolecular Systems and Processes Group (IBI-4), Forschungszentrum Jülich, Wilhelm-Johnen-Straße, 52428 Jülich, Germany.
ORCID-Profile: Vladimir Grachev, Olivier Deschaume, Peter R Lang, Carmen Bartic, Wim Thielemans
Förderung
- Research Foundation - Flanders
- KU Leuven
- Research Foundation Flanders
Zitieren
APA
Grachev, V., Deschaume, O., Lang, P. R., Lettinga, M. P., Bartic, C., & Thielemans, W. (2024). Dimensions of Cellulose Nanocrystals from Cotton and Bacterial Cellulose: Comparison of Microscopy and Scattering Techniques. Nanomaterials, 14(5), 455. https://doi.org/10.3390/nano14050455
Vancouver
Grachev V, Deschaume O, Lang PR, Lettinga MP, Bartic C, Thielemans W. Dimensions of Cellulose Nanocrystals from Cotton and Bacterial Cellulose: Comparison of Microscopy and Scattering Techniques. Nanomaterials. 2024;14(5):455. doi:10.3390/nano14050455
BibTeX
@article{Grachev2024,
author = {Grachev, Vladimir and Deschaume, Olivier and Lang, Peter R and Lettinga, Minne Paul and Bartic, Carmen and Thielemans, Wim},
title = {Dimensions of Cellulose Nanocrystals from Cotton and Bacterial Cellulose: Comparison of Microscopy and Scattering Techniques},
journal = {Nanomaterials},
year = {2024},
volume = {14},
number = {5},
pages = {455},
doi = {10.3390/nano14050455}
}
EUVIMED