EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Porous Carbon Interlayer Derived from Traditional Korean Paper for Li–S Batteries

Yunju Choi, Hyungil Jang iD, Jong-Pil Kim, Jaeyeong Lee, Euh Duck Jeong, Jong-Seong Bae iD, Heon-Cheol Shin

Nanomaterials · 19.02.2024 · 14 (4) · 385

DOI: 10.3390/nano14040385 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 19.02.2024. Verfasst von Yunju Choi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Busan Center, Korea Basic Science Institute (KBSI), Busan 46742, Republic of Korea. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Basic Science Institute, Ministry of Science and ICT of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A carbonized interlayer effectively helps to improve the electrochemical performance of lithium–sulfur (Li–S) batteries. In this study, a simple and inexpensive carbon intermediate layer was fabricated using a traditional Korean paper called “hanji”. This carbon interlayer has a fibrous porous structure, with a specific surface area of 91.82 m2 g−1 and a BJH adsorption average pore diameter of 26.63 nm. The prepared carbon interlayer was utilized as an intermediary layer in Li–S batteries to decrease the charge-transfer resistance and capture dissolved lithium polysulfides. The porous fiber-shaped carbon interlayer suppressed the migration of polysulfides produced during the electrochemical process. The carbon interlayer facilitates the adsorption of soluble lithium polysulfides, allowing for their re-utilization in subsequent cycles. Additionally, the carbon interlayer significantly reduces the polarization of the cell. This simple strategy results in a significant improvement in cycle performance. Consequently, the discharge capacity at 0.5 C after 150 cycles was confirmed to have improved by more than twofold, reaching 230 mAh g−1 for cells without the interlayer and 583 mAh g−1 for cells with the interlayer. This study demonstrates a simple method for improving the capacity of Li–S batteries by integrating a functional carbon interlayer.

Schlagwörter

Stichwörter der Autor:innen

Korean paperelectrochemical performancehanjilithium–sulfur batterysulfur cathode

Autor:innen und Institutionen

  • Busan Center, Korea Basic Science Institute (KBSI), Busan 46742, Republic of Korea.
  • Department of Materials Science and Engineering, Pusan National University, Busan 46241, Republic of Korea.

ORCID-Profile: Hyungil Jang, Jong-Seong Bae

Förderung

  • Korea Basic Science Institute
  • Ministry of Science and ICT of Korea

Zitieren

APA

Choi, Y., Jang, H., Kim, J. P., Lee, J., Jeong, E. D., Bae, J. S., & Shin, H. C. (2024). Porous Carbon Interlayer Derived from Traditional Korean Paper for Li–S Batteries. Nanomaterials, 14(4), 385. https://doi.org/10.3390/nano14040385

Vancouver

Choi Y, Jang H, Kim JP, Lee J, Jeong ED, Bae JS, et al. Porous Carbon Interlayer Derived from Traditional Korean Paper for Li–S Batteries. Nanomaterials. 2024;14(4):385. doi:10.3390/nano14040385

BibTeX
@article{Choi2024,
  author = {Choi, Yunju and Jang, Hyungil and Kim, Jong-Pil and Lee, Jaeyeong and Jeong, Euh Duck and Bae, Jong-Seong and Shin, Heon-Cheol},
  title = {Porous Carbon Interlayer Derived from Traditional Korean Paper for Li–S Batteries},
  journal = {Nanomaterials},
  year = {2024},
  volume = {14},
  number = {4},
  pages = {385},
  doi = {10.3390/nano14040385}
}
Kostenlos starten →