Fully Printed Cellulose Nanofiber–Ag Nanoparticle Composite for High-Performance Humidity Sensor
Nanomaterials · 10.02.2024 · 14 (4) · 343
DOI: 10.3390/nano14040343 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 10.02.2024. Verfasst von Mijin Won und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Creative Convergence Engineering, Hanbat National University, Yuseong-ku, Daejeon 34158, Republic of Korea. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Foundation of Korea (NRF) funded by the Ministry of Education 246.
Abstract (Originalsprache)
This paper reports a high-performance humidity sensor made using a novel cellulose nanofiber (CNF)–silver nanoparticle (AgNP) sensing material. The interdigital electrode pattern was printed via reverse-offset printing using Ag nano-ink, and the sensing layer on the printed interdigitated electrode (IDE) was formed by depositing the CNF-AgNP composite via inkjet printing. The structure and morphology of the CNF-AgNP layer are characterized using ultraviolet–visible spectroscopy, an X-ray diffractometer, field emission scanning electron microscopy, energy-dispersive X-ray analysis, and transmission electron microscopy. The humidity-sensing performance of the prepared sensors is evaluated by measuring the impedance changes under the relative humidity variation between 10 and 90% relative humidity. The CNF-AgNP sensor exhibited very sensitive and fast humidity-sensing responses compared to the CNF sensor. The electrode distance effect and the response and recovery times are investigated. The enhanced humidity-sensing performance is reflected in the increased conductivity of the Ag nanoparticles and the adsorption of free water molecules associated with the porous characteristics of the CNF layer. The CNF-AgNP composite enables the development of highly sensitive, fast-responding, reproducible, flexible, and inexpensive humidity sensors.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Creative Convergence Engineering, Hanbat National University, Yuseong-ku, Daejeon 34158, Republic of Korea.
- Creative Research Center for Nanocellulose Future Composites, Inha University, Incheon 22212, Republic of Korea.
ORCID-Profile: Jaehwan Kim
Förderung
- Research Foundation of Korea (NRF) funded by the Ministry of Education 246
Zitieren
APA
Won, M., Jung, M., Kim, J., & Kim, D. S. (2024). Fully Printed Cellulose Nanofiber–Ag Nanoparticle Composite for High-Performance Humidity Sensor. Nanomaterials, 14(4), 343. https://doi.org/10.3390/nano14040343
Vancouver
Won M, Jung M, Kim J, Kim DS. Fully Printed Cellulose Nanofiber–Ag Nanoparticle Composite for High-Performance Humidity Sensor. Nanomaterials. 2024;14(4):343. doi:10.3390/nano14040343
BibTeX
@article{Won2024,
author = {Won, Mijin and Jung, Minhun and Kim, Jaehwan and Kim, Dong-Soo},
title = {Fully Printed Cellulose Nanofiber–Ag Nanoparticle Composite for High-Performance Humidity Sensor},
journal = {Nanomaterials},
year = {2024},
volume = {14},
number = {4},
pages = {343},
doi = {10.3390/nano14040343}
}
EUVIMED