EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Using Hierarchically Structured, Nanoporous Particles as Building Blocks for NCM111 Cathodes

Werner Bauer iD, Marcus Müller iD, Luca Schneider, Marcel Häringer, Nicole Bohn, Joachim R Binder iD, Julian Klemens, Philip Scharfer, Wilhelm Schabel, Helmut Ehrenberg iD

Nanomaterials · 06.01.2024 · 14 (2) · 134

DOI: 10.3390/nano14020134 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 06.01.2024. Verfasst von Werner Bauer und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Applied Materials (IAM), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, German…. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, German Federal Ministry for Economic Affairs and Climate Action.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nanoparticles have many advantages as active materials, such as a short diffusion length, low charge transfer resistance, or a reduced probability of cracking. However, their low packing density makes them unsuitable for commercial battery applications. Hierarchically structured microparticles are synthesized from nanoscale primary particles by targeted aggregation. Due to their open accessible porosity, they retain the advantages of nanomaterials but can be packed much more densely. However, the intrinsic porosity of the secondary particles leads to limitations in processing properties and increases the overall porosity of the electrode, which must be balanced against the improved rate stability and increased lifetime. This is demonstrated for an established cathode material for lithium-ion batteries (LiNi0.33Co0.33Mn0.33O2, NCM111). For active materials with low electrical or ionic conductivity, especially post-lithium systems, hierarchically structured particles are often the only way to produce competitive electrodes.

Schlagwörter

Stichwörter der Autor:innen

active materialbatterycathodelithium-ion batterynanomaterialporosity

Autor:innen und Institutionen

  • Institute for Applied Materials (IAM), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany.
  • Thin Film Technology (TFT), Karlsruhe Institute of Technology (KIT), Straße am Forum 7, 76131 Karlsruhe, Germany.

ORCID-Profile: Werner Bauer, Marcus Müller, Joachim R Binder, Helmut Ehrenberg

Förderung

  • Deutsche Forschungsgemeinschaft
  • German Federal Ministry for Economic Affairs and Climate Action

Zitieren

APA

Bauer, W., Müller, M., Schneider, L., Häringer, M., Bohn, N., Binder, J. R., Klemens, J., Scharfer, P., Schabel, W., & Ehrenberg, H. (2024). Using Hierarchically Structured, Nanoporous Particles as Building Blocks for NCM111 Cathodes. Nanomaterials, 14(2), 134. https://doi.org/10.3390/nano14020134

Vancouver

Bauer W, Müller M, Schneider L, Häringer M, Bohn N, Binder JR, et al. Using Hierarchically Structured, Nanoporous Particles as Building Blocks for NCM111 Cathodes. Nanomaterials. 2024;14(2):134. doi:10.3390/nano14020134

BibTeX
@article{Bauer2024,
  author = {Bauer, Werner and Müller, Marcus and Schneider, Luca and Häringer, Marcel and Bohn, Nicole and Binder, Joachim R and Klemens, Julian and Scharfer, Philip and Schabel, Wilhelm and Ehrenberg, Helmut},
  title = {Using Hierarchically Structured, Nanoporous Particles as Building Blocks for NCM111 Cathodes},
  journal = {Nanomaterials},
  year = {2024},
  volume = {14},
  number = {2},
  pages = {134},
  doi = {10.3390/nano14020134}
}
Kostenlos starten →