Nitrogen-Doped Graphene Materials with High Electrical Conductivity Produced by Electrochemical Exfoliation of Graphite Foil
Nanomaterials · 04.01.2024 · 14 (1) · 123
DOI: 10.3390/nano14010123 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 04.01.2024. Verfasst von Hela Kammoun und 2 weiteren Autor:innen. Beteiligte Einrichtung: Centre Énergie Matériaux Télécommunications, Institut National de la Recherche Scientifique, 1650 Boulevard Lionel-Boulet, Varennes, QC J3X 1P7, Cana…. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 116 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council, Fonds de Recherche du Québec - Nature et Technologies, Natural Sciences and Engineering Research Council of Canada (NSERC) Strategic Partnership program.
Abstract (Originalsprache)
Nitrogen-doped graphene-based materials are of utmost importance in sensing and energy conversion devices due to their unique physicochemical properties. However, the presence of defects such as pyrrolic nitrogen and oxygenated functional groups reduces their electrical conductivity. Herein, a two-step approach based on the electrochemical exfoliation of graphite foils in aqueous mixed electrolytes followed by thermal reduction at 900 °C is used to prepare high-quality few layers of N-doped graphene-based materials. The exfoliations were conducted in 0.1 M (NH4)2SO4 or H2SO4 and HNO3 (5 mM or 0.1 M) electrolytes mixtures and the HNO3 vol% varied. Chemical analysis demonstrated that the as-prepared graphene oxides contain nitro and amine groups. Thermal reduction is needed for substitutional N-doping. Nitrogen and oxygen surface concentrations vary between 0.23–0.96% and 3–8%, respectively. Exfoliation in (NH4)2SO4 and/or 5 mM HNO3 favors the formation of pyridinic-N (10–40% of the total N), whereas 1 M HNO3 favors the formation of graphitic-N (≈60%). The electrical conductivity ranges between 166–2705 Scm−1. Raman spectroscopy revealed a low density of defects (ID/IG ratio between 0.1 and 0.7) and that most samples are composed of mono-to-bilayer graphene-based materials (IG/I2D integrated intensities ratio). Structural and compositional stability of selected samples after storage in air for three months is demonstrated. These results confirm the high quality of the synthesized undoped and N-doped graphene-type materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centre Énergie Matériaux Télécommunications, Institut National de la Recherche Scientifique, 1650 Boulevard Lionel-Boulet, Varennes, QC J3X 1P7, Canada.
ORCID-Profile: Benjamin D Ossonon, Ana C Tavares
Förderung
- Natural Sciences and Engineering Research Council
- Fonds de Recherche du Québec - Nature et Technologies
- Natural Sciences and Engineering Research Council of Canada (NSERC) Strategic Partnership program
- Fonds de Recherche du Québec—Nature et Technologie
Zitieren
APA
Kammoun, H., Ossonon, B. D., & Tavares, A. C. (2024). Nitrogen-Doped Graphene Materials with High Electrical Conductivity Produced by Electrochemical Exfoliation of Graphite Foil. Nanomaterials, 14(1), 123. https://doi.org/10.3390/nano14010123
Vancouver
Kammoun H, Ossonon BD, Tavares AC. Nitrogen-Doped Graphene Materials with High Electrical Conductivity Produced by Electrochemical Exfoliation of Graphite Foil. Nanomaterials. 2024;14(1):123. doi:10.3390/nano14010123
BibTeX
@article{Kammoun2024,
author = {Kammoun, Hela and Ossonon, Benjamin D and Tavares, Ana C},
title = {Nitrogen-Doped Graphene Materials with High Electrical Conductivity Produced by Electrochemical Exfoliation of Graphite Foil},
journal = {Nanomaterials},
year = {2024},
volume = {14},
number = {1},
pages = {123},
doi = {10.3390/nano14010123}
}
EUVIMED