EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Scalable Precursor-Assisted Synthesis of a High Voltage LiNiyCo1−yPO4 Cathode for Li-Ion Batteries

Mobinul Islam iD, Ghulam Ali iD, Muhammad Faizan, Daseul Han, Basit Ali, Sua Yun, Haseeb Ahmad iD, Kyung-Wan Nam iD

Nanomaterials · 16.12.2023 · 13 (24) · 3156

DOI: 10.3390/nano13243156 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 16.12.2023. Verfasst von Mobinul Islam und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Energy & Materials Engineering, Dongguk University, Seoul 04620, Republic of Korea. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea (NRF) grant, Korea government (MSIT), Nano & Material Technology Development Program through the National Research Foundation of Korea (NRF) funded by Ministry of Science and ICT.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A solid-solution cathode of LiCoPO4-LiNiPO4 was investigated as a potential candidate for use with the Li4Ti5O12 (LTO) anode in Li-ion batteries. A pre-synthesized nickel–cobalt hydroxide precursor is mixed with lithium and phosphate sources by wet ball milling, which results in the final product, LiNiyCo1−yPO4 (LNCP) by subsequent heat treatment. Crystal structure and morphology of the product were analyzed by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Its XRD patterns show that LNCP is primarily a single-phase compound and has olivine-type XRD patterns similar to its parent compounds, LiCoPO4 and LiNiPO4. Synchrotron X-ray absorption spectroscopy (XAS) analysis, however, indicates that Ni doping in LiCoPO4 is unfavorable because Ni2+ is not actively involved in the electrochemical reaction. Consequently, it reduces the charge storage capability of the LNCP cathode. Additionally, ex situ XRD analysis of cycled electrodes confirms the formation of the electrochemically inactive rock salt-type NiO phase. The discharge capacity of the LNCP cathode is entirely associated with the Co3+/Co2+ redox couple. The electrochemical evaluation demonstrated that the LNCP cathode paired with the LTO anode produced a 3.12 V battery with an energy density of 184 Wh kg−1 based on the cathode mass.

Schlagwörter

Stichwörter der Autor:innen

Li-ion batteryX-ray absorption spectroscopyhigh-voltage cathodehydroxide precursor

Autor:innen und Institutionen

  • Department of Energy & Materials Engineering, Dongguk University, Seoul 04620, Republic of Korea.
  • U.S.-Pakistan Center for Advanced Studies in Energy, National University of Sciences and Technology (NUST), Islamabad 44000, Pakistan.

ORCID-Profile: Mobinul Islam, Ghulam Ali, Haseeb Ahmad, Kyung-Wan Nam

Förderung

  • National Research Foundation of Korea (NRF) grant, Korea government (MSIT)
  • Nano & Material Technology Development Program through the National Research Foundation of Korea (NRF) funded by Ministry of Science and ICT

Zitieren

APA

Islam, M., Ali, G., Faizan, M., Han, D., Ali, B., Yun, S., Ahmad, H., & Nam, K. W. (2023). Scalable Precursor-Assisted Synthesis of a High Voltage LiNiyCo1−yPO4 Cathode for Li-Ion Batteries. Nanomaterials, 13(24), 3156. https://doi.org/10.3390/nano13243156

Vancouver

Islam M, Ali G, Faizan M, Han D, Ali B, Yun S, et al. Scalable Precursor-Assisted Synthesis of a High Voltage LiNiyCo1−yPO4 Cathode for Li-Ion Batteries. Nanomaterials. 2023;13(24):3156. doi:10.3390/nano13243156

BibTeX
@article{Islam2023,
  author = {Islam, Mobinul and Ali, Ghulam and Faizan, Muhammad and Han, Daseul and Ali, Basit and Yun, Sua and Ahmad, Haseeb and Nam, Kyung-Wan},
  title = {Scalable Precursor-Assisted Synthesis of a High Voltage LiNiyCo1−yPO4 Cathode for Li-Ion Batteries},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {24},
  pages = {3156},
  doi = {10.3390/nano13243156}
}
Kostenlos starten →