EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Conductive Additive Morphology and Crystallinity on the Electrochemical Performance of Ni-Rich Cathodes for Sulfide All-Solid-State Lithium-Ion Batteries

Jae Hong Choi, Sumyeong Choi, Tom James Embleton, Kyungmok Ko, Kashif Saleem Saqib iD, Jahanzaib Ali, Mina Jo, Junhyeok Hwang, Sungwoo Park, Minhu Kim, Mingi Hwang, Heesoo Lim und 1 weitere

Nanomaterials · 01.12.2023 · 13 (23) · 3065

DOI: 10.3390/nano13233065 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 01.12.2023. Verfasst von Jae Hong Choi und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Smart Green Technology Engineering, Pukyong National University, 45, Yongso-ro, Nam-gu, Busan 48547, Republic of Korea. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea Institute of Energy Technology Evaluation and Planning.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sulfide electrolyte all-solid-state lithium-ion batteries (ASSLBs) that have inherently nonflammable properties have improved greatly over the past decade. However, determining both the stable and functional electrode components to pair with these solid electrolytes requires significant investigation. Solid electrolyte comprises 20–40% of the composite cathode electrode, which improves the ionic conductivity. However, this results in thick electrolyte that blocks the electron pathways in the electrode, significantly lowering the electrochemical performance. The application of conductive carbon material is required to overcome this issue, and, hence, determining the carbon properties that result in the most stable performance in the sulfide solid electrolyte is vital. This study analyzes the effect of the cathode conductive additive’s morphology on the electrochemical performance of sulfide electrolyte-based ASSLBs. Carbon black (CB) and carbon nanotubes (CNTs), which provide electron pathways at the nanoscale and sub-micron scale, and carbon nanofiber (CNF), which provides electron pathways at the tens-of-microns scale, are all tested individually as potential conductive additives. When the CNF, with its high crystallinity, is used as a conductive material, the electrochemical performance shows an excellent initial discharge capacity of 191.78 mAh/g and a 50-cycle capacity retention of 83.9%. Conversely, the CB and the CNTs, with their shorter pathways and significantly increased surface area, show a relatively low electrochemical performance. By using the CNF to provide excellent electrical conductivity to the electrode, the polarization is suppressed. Furthermore, the interfacial impedance across the charge transfer region is also reduced over 50 cycles compared with the CB and CNT composite cells. These findings stringently analyze and emphasize the importance of the morphology of the carbon conductive additives in the ASSLB cathode electrodes, with improvements in the electrochemical performance being realized through the application of long-form two-dimensional crystalline CNFs.

Schlagwörter

Stichwörter der Autor:innen

all-solid-state lithium-ion batteriescarbon nanofiberconductive additivemorphology

Autor:innen und Institutionen

  • Department of Smart Green Technology Engineering, Pukyong National University, 45, Yongso-ro, Nam-gu, Busan 48547, Republic of Korea.
  • Department of Nanotechnology Engineering, Pukyong National University, 45, Yongso-ro, Nam-gu, Busan 48547, Republic of Korea.

ORCID-Profile: Kashif Saleem Saqib, Pilgun Oh

Förderung

  • National Research Foundation of Korea
  • Korea Institute of Energy Technology Evaluation and Planning

Zitieren

APA

Choi, J. H., Choi, S., Embleton, T. J., Ko, K., Saqib, K. S., Ali, J., Jo, M., Hwang, J., Park, S., Kim, M., Hwang, M., Lim, H., & Oh, P. (2023). The Effect of Conductive Additive Morphology and Crystallinity on the Electrochemical Performance of Ni-Rich Cathodes for Sulfide All-Solid-State Lithium-Ion Batteries. Nanomaterials, 13(23), 3065. https://doi.org/10.3390/nano13233065

Vancouver

Choi JH, Choi S, Embleton TJ, Ko K, Saqib KS, Ali J, et al. The Effect of Conductive Additive Morphology and Crystallinity on the Electrochemical Performance of Ni-Rich Cathodes for Sulfide All-Solid-State Lithium-Ion Batteries. Nanomaterials. 2023;13(23):3065. doi:10.3390/nano13233065

BibTeX
@article{Choi2023,
  author = {Choi, Jae Hong and Choi, Sumyeong and Embleton, Tom James and Ko, Kyungmok and Saqib, Kashif Saleem and Ali, Jahanzaib and Jo, Mina and Hwang, Junhyeok and Park, Sungwoo and Kim, Minhu and Hwang, Mingi and Lim, Heesoo and Oh, Pilgun},
  title = {The Effect of Conductive Additive Morphology and Crystallinity on the Electrochemical Performance of Ni-Rich Cathodes for Sulfide All-Solid-State Lithium-Ion Batteries},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {23},
  pages = {3065},
  doi = {10.3390/nano13233065}
}
Kostenlos starten →