Stepwise−Process−Controlled Ligand Management Strategy for Efficient and Stable Perovskite Quantum Dot Solar Cells
Nanomaterials · 27.11.2023 · 13 (23) · 3032
DOI: 10.3390/nano13233032 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 27.11.2023. Verfasst von Jinfei Dai und 6 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for Physical Electronics and Devices of the Ministry of Education, School of Electronic Science and Engineering, Xi'an Jiaotong Univer…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: zhaoxin wu, National Key Research and Development Plan of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
CsPbI3 perovskite quantum dots (QDs) have attracted much attention in the field of solar cells because of their excellent photovoltaic properties. Conventional modification of long−chain insulating ligands can ensure good dispersion and film−forming stability of QDs, but the limitations of their low defect passivation ability and poor charge transport ability will make them fail to achieve high efficiency in the corresponding solar cell devices. In this study, by introducing “Benzylphosphonic acid” short−chain ligands to the surface of CsPbI3 QDs, the ligands were re−administered on the surface during the preparation of the CsPbI3 QDs as well as during the film−forming process. The strong coordination ability of Benzenephosphonic acid can effectively passivate defects on the surface of CsPbI3 QDs and inhibit non−radiative recombination and phase transition. Meanwhile, this short−chain ligand can effectively promote the charge exchange between adjacent QDs and improve the electrical transport properties of the film. The efficiency of the Benzylphosphonic acid−modified CsPbI3 QDs solar cell reaches 13.91% compared to the unmodified device (PCE of 11.4%). The storage stability and operation stability of the device are also significantly improved. (The efficiency remains at 91% of the original for 800 h of atmospheric storage; the efficiency remains at 92% of the original for 200 h of continuous light exposure.) The present strategy realizes the simultaneous improvement of photovoltaic properties and stability of CsPbI3 QD solar cells and also provides a reference for surface ligand engineering to realize highly efficient and stable perovskite quantum dot solar cells.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory for Physical Electronics and Devices of the Ministry of Education, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China.
- Shaanxi Key Lab of Information Photonic Technique, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China.
- College of Science, Xi'an University of Architecture and Technology, Xi'an 710055, China.
ORCID-Profile: Jun Xi
Förderung
- zhaoxin wu
- National Key Research and Development Plan of China
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
Zitieren
APA
Dai, J., Guo, W., Xu, J., Xu, R., Xi, J., Dong, H., & Wu, Z. (2023). Stepwise−Process−Controlled Ligand Management Strategy for Efficient and Stable Perovskite Quantum Dot Solar Cells. Nanomaterials, 13(23), 3032. https://doi.org/10.3390/nano13233032
Vancouver
Dai J, Guo W, Xu J, Xu R, Xi J, Dong H, et al. Stepwise−Process−Controlled Ligand Management Strategy for Efficient and Stable Perovskite Quantum Dot Solar Cells. Nanomaterials. 2023;13(23):3032. doi:10.3390/nano13233032
BibTeX
@article{Dai2023,
author = {Dai, Jinfei and Guo, Wei and Xu, Jie and Xu, Ruoyao and Xi, Jun and Dong, Hua and Wu, Zhaoxin},
title = {Stepwise−Process−Controlled Ligand Management Strategy for Efficient and Stable Perovskite Quantum Dot Solar Cells},
journal = {Nanomaterials},
year = {2023},
volume = {13},
number = {23},
pages = {3032},
doi = {10.3390/nano13233032}
}
EUVIMED