Critical Electrospinning Parameters for Synthesis Control of Stabilized Polyacrylonitrile Nanofibers
Nanomaterials · 26.09.2023 · 13 (19) · 2648
DOI: 10.3390/nano13192648 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 26.09.2023. Verfasst von Juan Emmanuel Ruiz Rocha und 7 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Química, División de Ciencias Naturales y Exactas, Universidad de Guanajuato, Pueblito de Rocha s/n, Guanajuato 36040, Mexico. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: IDEA Guanajuato, Mexico, IDEA Gto through the projects, Programa Valle de la Mentefactura Guanajuato, modalidad mentefactura Tecnológica, submodalidad Conexión Internacional de la Ciencia.
Abstract (Originalsprache)
Polyacrylonitrile (PAN) fibers are widely used as precursors in the manufacture of high-conducting and mechanically resistant carbon fibers. The modulation of such fibers is carried out through electrospinning. In this work, we show the production and control of the morphology of nanometric-range PAN fibers for their potential use as precursors for high-electrical-conductivity carbon fibers. PAN samples dissolved in dimethylformamide (DMF) were prepared at 6, 10, and 12% w/w, at 15 and 25 kV. The impact of the rotation of the collector drum at 100, 300, and 500 RPM was also studied. It was found that the percentage of PAN in the solution proportionally affects the diameter of the fibers and that the preparation potential affects the morphology. The rotation speed, when increased, decreases the diameter, and it has a negative impact on the morphology. Fibers prepared with 6% w/w at 15 kV and 500 RPM show 90 nm diameters, the smallest diameter of all the samples.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Departamento de Química, División de Ciencias Naturales y Exactas, Universidad de Guanajuato, Pueblito de Rocha s/n, Guanajuato 36040, Mexico.
- Chimie ParisTech, PSL University, Institut de Recherche de Chimie Paris, Centre National de la Recherche Scientifique, 75005 Paris, France.
- ICGM, University Montpellier, CNRS, ENSCM, CEDEX 5, 34095 Montpellier, France.
- CIATEC A.C., Centro de Innovación Aplicada en Tecnología Competitiva, Omega 201, Industrial Delta, GTO, León 37545, Mexico.
ORCID-Profile: Juan Emmanuel Ruiz Rocha, Ricardo Navarro Mendoza, Sara Cavaliere, Jesús Salvador Jaime Ferrer
Förderung
- IDEA Guanajuato, Mexico
- IDEA Gto through the projects
- Programa Valle de la Mentefactura Guanajuato, modalidad mentefactura Tecnológica, submodalidad Conexión Internacional de la Ciencia
Zitieren
APA
Ruiz Rocha, J. E., Moreno Tovar, K. R., Navarro Mendoza, R., Gutiérrez Granados, S., Cavaliere, S., Giaume, D., Barboux, P., & Jaime Ferrer, J. S. (2023). Critical Electrospinning Parameters for Synthesis Control of Stabilized Polyacrylonitrile Nanofibers. Nanomaterials, 13(19), 2648. https://doi.org/10.3390/nano13192648
Vancouver
Ruiz Rocha JE, Moreno Tovar KR, Navarro Mendoza R, Gutiérrez Granados S, Cavaliere S, Giaume D, et al. Critical Electrospinning Parameters for Synthesis Control of Stabilized Polyacrylonitrile Nanofibers. Nanomaterials. 2023;13(19):2648. doi:10.3390/nano13192648
BibTeX
@article{RuizRocha2023,
author = {Ruiz Rocha, Juan Emmanuel and Moreno Tovar, Karla Rebeca and Navarro Mendoza, Ricardo and Gutiérrez Granados, Silvia and Cavaliere, Sara and Giaume, Domitille and Barboux, Philippe and Jaime Ferrer, Jesús Salvador},
title = {Critical Electrospinning Parameters for Synthesis Control of Stabilized Polyacrylonitrile Nanofibers},
journal = {Nanomaterials},
year = {2023},
volume = {13},
number = {19},
pages = {2648},
doi = {10.3390/nano13192648}
}
EUVIMED