EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Unraveling Anisotropy in Crystalline Orientation under Shock-Induced Dynamic Responses in High-Entropy Alloy Co25Ni25Fe25Al7.5Cu17.5

Yongchao Wu iD, Jianli Shao

Nanomaterials · 29.08.2023 · 13 (17) · 2446

DOI: 10.3390/nano13172446 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 29.08.2023. Verfasst von Yongchao Wu und 1 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China-NSAF, State Key Program of the National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Shock-induced plastic deformation and spall damage in the single-crystalline FCC Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy (HEA) under varying shock intensities were systematically investigated using large-scale molecular dynamics simulations. The study reveals the significant influence of crystalline orientation on the deformation mechanism and spall damage. Specifically, the shock wave velocities in the [110] and [111] directions are significantly higher than that in the [001] direction, resulting in a two-zone elastic-plastic shock wave structure observed in the [110] and [111] samples, while only a single-wave structure is found in the [001] sample. The plastic deformation is dominated by the FCC to BCC transformation following the Bain path and a small amount of stacking faults during the compression stage in the [001] sample, whereas it depends on the stacking faults induced by Shockley dislocation motion in the [110] and [111] samples. The stacking faults and phase transformation in the [001] sample exhibit high reversibility under release effects, while extensive dislocations are present in the [110] and [111] samples after release. Interestingly, tension-strain-induced FCC to BCC phase transformation is observed in the [001] sample during the release stage, resulting in increased spall strength compared to the [110] and [111] samples. The spall strength estimated from both bulk and free surface velocity history shows reasonable consistency. Additionally, the spall strength remains stable with increasing shock intensities. The study discusses in detail the shock wave propagation, microstructure change, and spall damage evolution. Overall, our comprehensive studies provide deep insights into the deformation and fracture mechanisms of Co25Ni25Fe25Al7.5Cu17.5 HEA under shock loading, contributing to a better understanding of dynamic deformation under extreme environments.

Schlagwörter

Stichwörter der Autor:innen

high-entropy alloymolecular dynamicsphase transformationshock responsespall damage

Autor:innen und Institutionen

  • State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China.
  • Explosion Protection and Emergency Disposal Technology Engineering Research Center of the Ministry of Education, Beijing 100039, China.

ORCID-Profile: Yongchao Wu

Förderung

  • National Natural Science Foundation of China-NSAF
  • State Key Program of the National Natural Science Foundation of China

Zitieren

APA

Wu, Y., & Shao, J. (2023). Unraveling Anisotropy in Crystalline Orientation under Shock-Induced Dynamic Responses in High-Entropy Alloy Co25Ni25Fe25Al7.5Cu17.5. Nanomaterials, 13(17), 2446. https://doi.org/10.3390/nano13172446

Vancouver

Wu Y, Shao J. Unraveling Anisotropy in Crystalline Orientation under Shock-Induced Dynamic Responses in High-Entropy Alloy Co25Ni25Fe25Al7.5Cu17.5. Nanomaterials. 2023;13(17):2446. doi:10.3390/nano13172446

BibTeX
@article{Wu2023,
  author = {Wu, Yongchao and Shao, Jianli},
  title = {Unraveling Anisotropy in Crystalline Orientation under Shock-Induced Dynamic Responses in High-Entropy Alloy Co25Ni25Fe25Al7.5Cu17.5},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {17},
  pages = {2446},
  doi = {10.3390/nano13172446}
}
Kostenlos starten →