Stabilization of Beeswax-In-Water Dispersions Using Anionic Cellulose Nanofibers and Their Application in Paper Coating
Nanomaterials · 16.08.2023 · 13 (16) · 2353
DOI: 10.3390/nano13162353 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 16.08.2023. Verfasst von Genís Bayés und 4 weiteren Autor:innen. Beteiligte Einrichtung: LEPAMAP-PRODIS Research Group, University of Girona, Maria Aurèlia Capmany, 61, 17003 Girona, Spain. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia e Innovación, Department of Research and Universities of the Government of Catalonia, Spanish Ministry of Science and Innovation.
Abstract (Originalsprache)
Beeswax is a bio-sourced, renewable, and even edible material that stands as a convincing option to provide paper-based food packaging with moisture resistance. Nonetheless, the difficulty of dispersing it in water limits its applicability. This work uses oxidized, negatively charged cellulose nanofibers along with glycerol to stabilize beeswax-in-water emulsions above the melting point of the wax. The synergistic effects of nanocellulose and glycerol granted the stability of the dispersion even when it cooled down, but only if the concentration of nanofibers was high enough. This required concentration (0.6–0.9 wt%) depended on the degree of oxidation of the cellulose nanofibers. Rheological hindrance was essential to prevent the buoyancy of beeswax particles, while the presence of glycerol prevented excessive aggregation. The mixtures had yield stress and showed pseudoplastic behavior at a high enough shear rate, with their apparent viscosity being positively influenced by the surface charge density of the nanofibers. When applied to packaging paper, the nanocellulose-stabilized beeswax suspensions not only enhanced its barrier properties towards liquid water (reaching a contact angle of 96°) and water vapor (1400 Gurley s). While falling short of polyethylene-coated paper, this overall improvement, attained using only one layer of a biobased coating suspension, should be understood as a step towards replacing synthetic waxes and plastic laminates.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- LEPAMAP-PRODIS Research Group, University of Girona, Maria Aurèlia Capmany, 61, 17003 Girona, Spain.
- Noel Alimentària SAU, Pla de Begudà, 17857 Begudà, Spain.
ORCID-Profile: Roberto J Aguado, Quim Tarrés, Marc Delgado-Aguilar
Förderung
- Ministerio de Ciencia e Innovación
- Department of Research and Universities of the Government of Catalonia
- Spanish Ministry of Science and Innovation
- Department of Research and Universities from the Government of Catalonia
Zitieren
APA
Bayés, G., Aguado, R. J., Tarrés, Q., Planella, J., & Delgado-Aguilar, M. (2023). Stabilization of Beeswax-In-Water Dispersions Using Anionic Cellulose Nanofibers and Their Application in Paper Coating. Nanomaterials, 13(16), 2353. https://doi.org/10.3390/nano13162353
Vancouver
Bayés G, Aguado RJ, Tarrés Q, Planella J, Delgado-Aguilar M. Stabilization of Beeswax-In-Water Dispersions Using Anionic Cellulose Nanofibers and Their Application in Paper Coating. Nanomaterials. 2023;13(16):2353. doi:10.3390/nano13162353
BibTeX
@article{Bays2023,
author = {Bayés, Genís and Aguado, Roberto J and Tarrés, Quim and Planella, Jaume and Delgado-Aguilar, Marc},
title = {Stabilization of Beeswax-In-Water Dispersions Using Anionic Cellulose Nanofibers and Their Application in Paper Coating},
journal = {Nanomaterials},
year = {2023},
volume = {13},
number = {16},
pages = {2353},
doi = {10.3390/nano13162353}
}
EUVIMED