EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Co-Influence of Nanofiller Content and 3D Printing Parameters on Mechanical Properties of Thermoplastic Polyurethane (TPU)/Halloysite Nanotube (HNT) Nanocomposites

Wendy Triadji Nugroho iD, Yu Dong iD, Alokesh Pramanik iD, Zhixiao Zhang, Seeram Ramakrishna iD

Nanomaterials · 29.06.2023 · 13 (13) · 1975

DOI: 10.3390/nano13131975 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 29.06.2023. Verfasst von Wendy Triadji Nugroho und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Mechanical Engineering, Curtin University, P.O. Box U1987, Perth, WA 6845, Australia. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Finance of the Republic of Indonesia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermoplastic polyurethane (TPU) belongs to a polyurethane family that possesses an elongation much higher than 300%, despite having low mechanical strength, which can be overcome by incorporating clay-based halloysite nanotubes (HNTs) as additives to manufacture TPU/HNT nanocomposites. This paper focuses on the co-influence of HNT content and 3D printing parameters on the mechanical properties of 3D printed TPU/HNT nanocomposites in terms of tensile properties, hardness, and abrasion resistance via fused deposition modelling (FDM). The optimum factor-level combination for different responses was determined with the aid of robust statistical Taguchi design of experiments (DoEs). Material characterisation was also carried out to evaluate the surface morphology, nanofiller dispersion, chemical structure, thermal stability, and phase behaviour corresponding to the DoE results obtained. It is evidently shown that HNT level and infill density play a significant role in impacting mechanical properties of 3D-printed TPU/HNT nanocomposites.

Schlagwörter

Stichwörter der Autor:innen

Taguchi design of experiments (DoEs)fused deposition modelling (FDM)halloysite nanotubes (HNTs)material characterisationmechanical propertiesthermoplastic polyurethane (TPU)

Autor:innen und Institutionen

  • School of Civil and Mechanical Engineering, Curtin University, P.O. Box U1987, Perth, WA 6845, Australia.
  • School of Materials Science and Engineering, Hebei University of Engineering, Handan 056038, China.
  • Department of Mechanical Engineering, National University of Singapore, Singapore 117575, Singapore.

ORCID-Profile: Wendy Triadji Nugroho, Yu Dong, Alokesh Pramanik, Seeram Ramakrishna

Förderung

  • Ministry of Finance of the Republic of Indonesia

Zitieren

APA

Nugroho, W. T., Dong, Y., Pramanik, A., Zhang, Z., & Ramakrishna, S. (2023). Co-Influence of Nanofiller Content and 3D Printing Parameters on Mechanical Properties of Thermoplastic Polyurethane (TPU)/Halloysite Nanotube (HNT) Nanocomposites. Nanomaterials, 13(13), 1975. https://doi.org/10.3390/nano13131975

Vancouver

Nugroho WT, Dong Y, Pramanik A, Zhang Z, Ramakrishna S. Co-Influence of Nanofiller Content and 3D Printing Parameters on Mechanical Properties of Thermoplastic Polyurethane (TPU)/Halloysite Nanotube (HNT) Nanocomposites. Nanomaterials. 2023;13(13):1975. doi:10.3390/nano13131975

BibTeX
@article{Nugroho2023,
  author = {Nugroho, Wendy Triadji and Dong, Yu and Pramanik, Alokesh and Zhang, Zhixiao and Ramakrishna, Seeram},
  title = {Co-Influence of Nanofiller Content and 3D Printing Parameters on Mechanical Properties of Thermoplastic Polyurethane (TPU)/Halloysite Nanotube (HNT) Nanocomposites},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {13},
  pages = {1975},
  doi = {10.3390/nano13131975}
}
Kostenlos starten →