EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Bonding-Strength Polyimide Films Achieved via Thermal Management and Surface Activation

Pin-Syuan He, Dinh-Phuc Tran, Ting-Yu Kuo, Wei-You Hsu, Huai-En Lin, Kai-Cheng Shie, Chih Chen iD

Nanomaterials · 08.05.2023 · 13 (9) · 1575

DOI: 10.3390/nano13091575 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 08.05.2023. Verfasst von Pin-Syuan He und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu 30010, Taiwan. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, Taiwan, “Center for the Semiconductor Technology Research” from The Featured Areas Research Center Program within the framework of the Higher Education Sprout Project…, The Featured Areas Research Center Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, thermal and argon (Ar) plasma/wetting treatments were combined to enhance the bonding strength of polyimide (PI) films. Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) was used to analyze the changes in the PI imidization degrees. The contact angles of the PI films were also measured. The results show that the contact angles of the fully cured PI films markedly decreased from 78.54° to 26.05° after the Ar plasma treatments. X-ray photoelectron spectroscopy (XPS) analysis was also conducted on the PI surfaces. We found that the intensities of the C-OH and C-N-H bonds increased from 0% to 13% and 29% to 57%, respectively, after Ar plasma activation. Such increases in the C-OH and C-N-H intensities could be attributed to the generation of dangling bonds and the breakage of the imide ring or polymer long chains. Shear tests were also conducted to characterize the bonding strength of the PI films, which, after being treated with the appropriate parameters of temperature, plasma power, and wetting droplets, was found to be excellent at greater than 35.3 MPa.

Schlagwörter

Stichwörter der Autor:innen

bonding strengthhybrid bondingpartial curingpolyimidesurface modification

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu 30010, Taiwan.
  • Department of Materials Science and Engineering, National Chiao Tung University, Hsinchu 30010, Taiwan.

ORCID-Profile: Chih Chen

Förderung

  • National Science and Technology Council, Taiwan
  • “Center for the Semiconductor Technology Research” from The Featured Areas Research Center Program within the framework of the Higher Education Sprout Project…
  • The Featured Areas Research Center Program
  • Core Facility Center of National Cheng Kung University, Taiwan

Zitieren

APA

He, P. S., Tran, D. P., Kuo, T. Y., Hsu, W. Y., Lin, H. E., Shie, K. C., & Chen, C. (2023). High-Bonding-Strength Polyimide Films Achieved via Thermal Management and Surface Activation. Nanomaterials, 13(9), 1575. https://doi.org/10.3390/nano13091575

Vancouver

He PS, Tran DP, Kuo TY, Hsu WY, Lin HE, Shie KC, et al. High-Bonding-Strength Polyimide Films Achieved via Thermal Management and Surface Activation. Nanomaterials. 2023;13(9):1575. doi:10.3390/nano13091575

BibTeX
@article{He2023,
  author = {He, Pin-Syuan and Tran, Dinh-Phuc and Kuo, Ting-Yu and Hsu, Wei-You and Lin, Huai-En and Shie, Kai-Cheng and Chen, Chih},
  title = {High-Bonding-Strength Polyimide Films Achieved via Thermal Management and Surface Activation},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {9},
  pages = {1575},
  doi = {10.3390/nano13091575}
}
Kostenlos starten →