EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Atomistic Insights on Surface Quality Control via Annealing Process in AlGaN Thin Film Growth

Qing Peng iD, Zhiwei Ma iD, Shixian Cai, Shuai Zhao, Xiaojia Chen, Qiang Cao

Nanomaterials · 16.04.2023 · 13 (8) · 1382

DOI: 10.3390/nano13081382 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 16.04.2023. Verfasst von Qing Peng und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Science, Harbin Institute of Technology, Shenzhen 518055, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shenzhen Science and Technology Program, National Natural Science Foundation of China, Chinese Academy of Sciences.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum gallium nitride (AlGaN) is a nanohybrid semiconductor material with a wide bandgap, high electron mobility, and high thermal stability for various applications including high-power electronics and deep ultraviolet light-emitting diodes. The quality of thin films greatly affects their performance in applications in electronics and optoelectronics, whereas optimizing the growth conditions for high quality is a great challenge. Herein, we have investigated the process parameters for the growth of AlGaN thin films via molecular dynamics simulations. The effects of annealing temperature, the heating and cooling rate, the number of annealing rounds, and high temperature relaxation on the quality of AlGaN thin films have been examined for two annealing modes: constant temperature annealing and laser thermal annealing. Our results reveal that for the mode of constant temperature annealing, the optimum annealing temperature is much higher than the growth temperature in annealing at the picosecond time scale. The lower heating and cooling rates and multiple-round annealing contribute to the increase in the crystallization of the films. For the mode of laser thermal annealing, similar effects have been observed, except that the bonding process is earlier than the potential energy reduction. The optimum AlGaN thin film is achieved at a thermal annealing temperature of 4600 K and six rounds of annealing. Our atomistic investigation provides atomistic insights and fundamental understanding of the annealing process, which could be beneficial for the growth of AlGaN thin films and their broad applications.

Schlagwörter

Stichwörter der Autor:innen

AlGaN thin filmatomistic structurelaser annealingmolecular dynamics simulations

Autor:innen und Institutionen

  • School of Science, Harbin Institute of Technology, Shenzhen 518055, China.
  • State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China.
  • School of Engineering Science, University of Chinese Academy of Sciences, Beijing 100049, China.
  • The Institute of Technological Sciences, Wuhan University, Wuhan 430072, China.

ORCID-Profile: Qing Peng, Zhiwei Ma

Förderung

  • Shenzhen Science and Technology Program
  • National Natural Science Foundation of China
  • Chinese Academy of Sciences
  • Strategic Priority Research Program of the Chinese Academy of Sciences
  • LiYing Program of the Institute of Mechanics, Chinese Academy of Sciences

Zitieren

APA

Peng, Q., Ma, Z., Cai, S., Zhao, S., Chen, X., & Cao, Q. (2023). Atomistic Insights on Surface Quality Control via Annealing Process in AlGaN Thin Film Growth. Nanomaterials, 13(8), 1382. https://doi.org/10.3390/nano13081382

Vancouver

Peng Q, Ma Z, Cai S, Zhao S, Chen X, Cao Q. Atomistic Insights on Surface Quality Control via Annealing Process in AlGaN Thin Film Growth. Nanomaterials. 2023;13(8):1382. doi:10.3390/nano13081382

BibTeX
@article{Peng2023,
  author = {Peng, Qing and Ma, Zhiwei and Cai, Shixian and Zhao, Shuai and Chen, Xiaojia and Cao, Qiang},
  title = {Atomistic Insights on Surface Quality Control via Annealing Process in AlGaN Thin Film Growth},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {8},
  pages = {1382},
  doi = {10.3390/nano13081382}
}
Kostenlos starten →