EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Highly Stable and Enhanced Performance of p–i–n Perovskite Solar Cells via Cuprous Oxide Hole-Transport Layers

Tung-Han Chuang, Yin-Hung Chen, Shikha Sakalley, Wei-Chun Cheng, Choon Kit Chan iD, Chih-Ping Chen iD, Sheng-Chi Chen

Nanomaterials · 14.04.2023 · 13 (8) · 1363

DOI: 10.3390/nano13081363 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 14.04.2023. Verfasst von Tung-Han Chuang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials Science and Engineering, National Taiwan University, Taipei 106, Taiwan. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology of Taiwan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solar light is a renewable source of energy that can be used and transformed into electricity using clean energy technology. In this study, we used direct current magnetron sputtering (DCMS) to sputter p-type cuprous oxide (Cu2O) films with different oxygen flow rates (fO2) as hole-transport layers (HTLs) for perovskite solar cells (PSCs). The PSC device with the structure of ITO/Cu2O/perovskite/[6,6]-phenyl-C61-butyric acid methyl ester (PC61BM)/bathocuproine (BCP)/Ag showed a power conversion efficiency (PCE) of 7.91%. Subsequently, a high-power impulse magnetron sputtering (HiPIMS) Cu2O film was embedded and promoted the device performance to 10.29%. As HiPIMS has a high ionization rate, it can create higher density films with low surface roughness, which passivates surface/interface defects and reduces the leakage current of PSCs. We further applied the superimposed high-power impulse magnetron sputtering (superimposed HiPIMS) derived Cu2O as the HTL, and we observed PCEs of 15.20% under one sun (AM1.5G, 1000 Wm−2) and 25.09% under indoor illumination (TL-84, 1000 lux). In addition, this PSC device outperformed by demonstrating remarkable long-term stability via retaining 97.6% (dark, Ar) of its performance for over 2000 h.

Schlagwörter

Stichwörter der Autor:innen

Cu2O filmsDCMSHiPIMShole-transport layer (HTL)power conversion efficiency (PCE)solar cellsuperimposed HiPIMS

Autor:innen und Institutionen

  • Institute of Materials Science and Engineering, National Taiwan University, Taipei 106, Taiwan.
  • Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan.
  • Department of Materials Engineering and Center for Plasma and Thin Film Technologies, Ming Chi University of Technology, New Taipei City 243, Taiwan.
  • Mechanical Engineering Department, Faculty of Engineering and Quantity Surveying, INTI International University, Nilai 71800, Negeri Sembilan, Malaysia.
  • College of Engineering and Center for Green Technology, Chang Gung University, Taoyuan 333, Taiwan.

ORCID-Profile: Choon Kit Chan, Chih-Ping Chen

Förderung

  • Ministry of Science and Technology of Taiwan

Zitieren

APA

Chuang, T. H., Chen, Y. H., Sakalley, S., Cheng, W. C., Chan, C. K., Chen, C. P., & Chen, S. C. (2023). Highly Stable and Enhanced Performance of p–i–n Perovskite Solar Cells via Cuprous Oxide Hole-Transport Layers. Nanomaterials, 13(8), 1363. https://doi.org/10.3390/nano13081363

Vancouver

Chuang TH, Chen YH, Sakalley S, Cheng WC, Chan CK, Chen CP, et al. Highly Stable and Enhanced Performance of p–i–n Perovskite Solar Cells via Cuprous Oxide Hole-Transport Layers. Nanomaterials. 2023;13(8):1363. doi:10.3390/nano13081363

BibTeX
@article{Chuang2023,
  author = {Chuang, Tung-Han and Chen, Yin-Hung and Sakalley, Shikha and Cheng, Wei-Chun and Chan, Choon Kit and Chen, Chih-Ping and Chen, Sheng-Chi},
  title = {Highly Stable and Enhanced Performance of p–i–n Perovskite Solar Cells via Cuprous Oxide Hole-Transport Layers},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {8},
  pages = {1363},
  doi = {10.3390/nano13081363}
}
Kostenlos starten →