EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermodynamic Analysis of a Flat Plate Solar Collector with Different Hybrid Nanofluids as Working Medium—A Thermal Modelling Approach

R M Mostafizur iD, M G Rasul, M N Nabi, R Haque iD, M I Jahirul

Nanomaterials · 09.04.2023 · 13 (8) · 1320

DOI: 10.3390/nano13081320 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 09.04.2023. Verfasst von R M Mostafizur und 4 weiteren Autor:innen. Beteiligte Einrichtung: Fuel and Energy Research Group, School of Engineering and Technology, Central Queensland University, Rockhampton, QLD 4702, Australia. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the performance of hybrid nanofluids in a flat plate solar collector was analysed based on various parameters such as entropy generation, exergy efficiency, heat transfer enhancement, pumping power, and pressure drop. Five different base fluids were used, including water, ethylene glycol, methanol, radiator coolant, and engine oil, to make five types of hybrids nanofluids containing suspended CuO and MWCNT nanoparticles. The nanofluids were evaluated at nanoparticle volume fractions ranging from 1% to 3% and flow rates of 1 to 3.5 L/min. The analytical results revealed that the CuO-MWCNT/water nanofluid performed the best in reducing entropy generation at both volume fractions and volume flow rate when compared to the other nanofluids studied. Although CuO-MWCNT/methanol showed better heat transfer coefficients than CuO-MWCNT/water, it generated more entropy and had lower exergy efficiency. The CuO-MWCNT/water nanofluid not only had higher exergy efficiency and thermal performance but also showed promising results in reducing entropy generation.

Schlagwörter

Stichwörter der Autor:innen

entropy generationexergy efficiencyflat plate solar collectorheat transfer coefficienthybrid nanofluidpumping power

Autor:innen und Institutionen

  • Fuel and Energy Research Group, School of Engineering and Technology, Central Queensland University, Rockhampton, QLD 4702, Australia.
  • Fuel and Energy Research Group, School of Engineering and Technology, Central Queensland University, Melbourne, VIC 3000, Australia.
  • School of Science, Technology and Engineering, University of the Sunshine Coast, Sippy Downs, QLD 4556, Australia.

ORCID-Profile: R M Mostafizur, R Haque

Zitieren

APA

Mostafizur, R. M., Rasul, M. G., Nabi, M. N., Haque, R., & Jahirul, M. I. (2023). Thermodynamic Analysis of a Flat Plate Solar Collector with Different Hybrid Nanofluids as Working Medium—A Thermal Modelling Approach. Nanomaterials, 13(8), 1320. https://doi.org/10.3390/nano13081320

Vancouver

Mostafizur RM, Rasul MG, Nabi MN, Haque R, Jahirul MI. Thermodynamic Analysis of a Flat Plate Solar Collector with Different Hybrid Nanofluids as Working Medium—A Thermal Modelling Approach. Nanomaterials. 2023;13(8):1320. doi:10.3390/nano13081320

BibTeX
@article{Mostafizur2023,
  author = {Mostafizur, R M and Rasul, M G and Nabi, M N and Haque, R and Jahirul, M I},
  title = {Thermodynamic Analysis of a Flat Plate Solar Collector with Different Hybrid Nanofluids as Working Medium—A Thermal Modelling Approach},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {8},
  pages = {1320},
  doi = {10.3390/nano13081320}
}
Kostenlos starten →