EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Analysis of Stable (FAPbI3)0.85(MAPbBr3)0.15-Based Perovskite Solar Cell with TiO2/ZnO Double Electron Layer

Yongjin Gan, Guixin Qiu, Binyi Qin, Xueguang Bi iD, Yucheng Liu iD, Guochao Nie iD, Weilian Ning, Ruizhao Yang iD

Nanomaterials · 08.04.2023 · 13 (8) · 1313

DOI: 10.3390/nano13081313 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 08.04.2023. Verfasst von Yongjin Gan und 7 weiteren Autor:innen. Beteiligte Einrichtung: Guangxi Colleges and Universities Key Laboratory of Complex System Optimization and Big Data Processing, Yulin Normal University, Yulin 537000, China. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Natural Science Foundation - Youth Fund Program, Yulin Normal University, Guangxi Key Laboratory of Optoelectronic Information Processing Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although perovskite solar cells have achieved excellent photoelectric conversion efficiencies, there are still some shortcomings, such as defects inside and at the interface as well as energy level dislocation, which may lead to non-radiative recombination and reduce stability. Therefore, in this study, a double electron transport layer (ETL) structure of FTO/TiO2/ZnO/(FAPbI3)0.85(MAPbBr3)0.15/Spiro-OMeTAD is investigated and compared with single ETL structures of FTO/TiO2/(FAPbI3)0.85(MAPbBr3)0.15/Spiro-OMeTAD and FTO/ZnO/(FAPbI3)0.85(MAPbBr3)0.15/Spiro-OMeTAD using the SCAPS-1D simulation software, with special attention paid to the defect density in the perovskite active layer, defect density at the interface between the ETL and the perovskite active layer, and temperature. Simulation results reveal that the proposed double ETL structure could effectively reduce the energy level dislocation and inhibit the non-radiative recombination. The increases in the defect density in the perovskite active layer, the defect density at the interface between the ETL and the perovskite active layer, and the temperature all facilitate carrier recombination. Compared with the single ETL structure, the double ETL structure has a higher tolerance for defect density and temperature. The simulation outcomes also confirm the possibility of preparing a stable perovskite solar cell.

Schlagwörter

Stichwörter der Autor:innen

SCAPS-1Ddefect densityenergy levelperovskite solar celltemperature

Autor:innen und Institutionen

  • Guangxi Colleges and Universities Key Laboratory of Complex System Optimization and Big Data Processing, Yulin Normal University, Yulin 537000, China.
  • Office of the Party Committee, Guangxi Minzu Normal University, Chongzuo 532200, China.
  • School of Physics and Telecommunication Engineering, Yulin Normal University, Yulin 537000, China.
  • Optoelectronic Information Research Center, School of Physics and Telecommunication Engineering, Yulin Normal University, Yulin 537000, China.
  • Department of Mechanical Engineering, South Dakota State University, Brookings, SD 57007, USA.

ORCID-Profile: Xueguang Bi, Yucheng Liu, Guochao Nie, Ruizhao Yang

Förderung

  • Guangxi Natural Science Foundation - Youth Fund Program
  • Yulin Normal University
  • Guangxi Key Laboratory of Optoelectronic Information Processing Project
  • Guangxi Innovation Driven Development Major Program
  • Guangxi University Young and Middle-Aged Teacher's Basic Scientific Research Ability Improvement Program
  • Guangxi Natural Science Foundation-Youth Fund Program
  • Guangxi Innovation Driven Development Major Project
  • Guangxi University Young and Middle-aged Teachers’ Basic Scientific Research Ability Improvement Project

Zitieren

APA

Gan, Y., Qiu, G., Qin, B., Bi, X., Liu, Y., Nie, G., Ning, W., & Yang, R. (2023). Numerical Analysis of Stable (FAPbI3)0.85(MAPbBr3)0.15-Based Perovskite Solar Cell with TiO2/ZnO Double Electron Layer. Nanomaterials, 13(8), 1313. https://doi.org/10.3390/nano13081313

Vancouver

Gan Y, Qiu G, Qin B, Bi X, Liu Y, Nie G, et al. Numerical Analysis of Stable (FAPbI3)0.85(MAPbBr3)0.15-Based Perovskite Solar Cell with TiO2/ZnO Double Electron Layer. Nanomaterials. 2023;13(8):1313. doi:10.3390/nano13081313

BibTeX
@article{Gan2023,
  author = {Gan, Yongjin and Qiu, Guixin and Qin, Binyi and Bi, Xueguang and Liu, Yucheng and Nie, Guochao and Ning, Weilian and Yang, Ruizhao},
  title = {Numerical Analysis of Stable (FAPbI3)0.85(MAPbBr3)0.15-Based Perovskite Solar Cell with TiO2/ZnO Double Electron Layer},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {8},
  pages = {1313},
  doi = {10.3390/nano13081313}
}
Kostenlos starten →