Numerical Study on the Buckling Behavior of FG Porous Spherical Caps Reinforced by Graphene Platelets
Nanomaterials · 28.03.2023 · 13 (7) · 1205
DOI: 10.3390/nano13071205 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 28.03.2023. Verfasst von Zhimin Zhou und 5 weiteren Autor:innen. Beteiligte Einrichtung: Hangzhou Vocational & Technical College, Hangzhou 310018, China. Die Arbeit wurde bisher 51-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The buckling response of functionally graded (FG) porous spherical caps reinforced by graphene platelets (GPLs) is assessed here, including both symmetric and uniform porosity patterns in the metal matrix, together with five different GPL distributions. The Halpin–Tsai model is here applied, together with an extended rule of mixture to determine the elastic properties and mass density of the selected shells, respectively. The equilibrium equations of the pre-buckling state are here determined according to a linear three-dimensional (3D) elasticity basics and principle of virtual work, whose solution is determined from classical finite elements. The buckling load is, thus, obtained based on the nonlinear Green strain field and generalized geometric stiffness concept. A large parametric investigation studies the sensitivity of the natural frequencies of FG porous spherical caps reinforced by GPLs to different parameters, namely, the porosity coefficients and distributions, together with different polar angles and stiffness coefficients of the elastic foundation, but also different GPL patterns and weight fractions of graphene nanofillers. Results denote that the maximum and minimum buckling loads are reached for GPL-X and GPL-O distributions, respectively. Additionally, the difference between the maximum and minimum critical buckling loads for different porosity distributions is approximately equal to 90%, which belong to symmetric distributions. It is also found that a high weight fraction of GPLs and a high porosity coefficient yield the highest and lowest effects of the structure on the buckling loads of the structure for an amount of 100% and 12.5%, respectively.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hangzhou Vocational & Technical College, Hangzhou 310018, China.
- Department of Innovation Engineering, Faculty of Engineering, University of Salento, 73100 Lecce, Italy.
- Department of Mechanical Engineering, Islamic Azad University, North Tehran Branch, Tehran 1477893855, Iran.
ORCID-Profile: Rossana Dimitri, Francesco Tornabene, Kamran Asemi
Zitieren
APA
Zhou, Z., Wang, Y., Zhang, S., Dimitri, R., Tornabene, F., & Asemi, K. (2023). Numerical Study on the Buckling Behavior of FG Porous Spherical Caps Reinforced by Graphene Platelets. Nanomaterials, 13(7), 1205. https://doi.org/10.3390/nano13071205
Vancouver
Zhou Z, Wang Y, Zhang S, Dimitri R, Tornabene F, Asemi K. Numerical Study on the Buckling Behavior of FG Porous Spherical Caps Reinforced by Graphene Platelets. Nanomaterials. 2023;13(7):1205. doi:10.3390/nano13071205
BibTeX
@article{Zhou2023,
author = {Zhou, Zhimin and Wang, Yun and Zhang, Suying and Dimitri, Rossana and Tornabene, Francesco and Asemi, Kamran},
title = {Numerical Study on the Buckling Behavior of FG Porous Spherical Caps Reinforced by Graphene Platelets},
journal = {Nanomaterials},
year = {2023},
volume = {13},
number = {7},
pages = {1205},
doi = {10.3390/nano13071205}
}
EUVIMED