EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermally Deposited Sb2Se3/CdS-Based Solar Cell: Experimental and Theoretical Analysis

Mamta, Raman Kumari iD, Chandan Yadav iD, Rahul Kumar, Kamlesh Kumar Maurya, Vidya Nand Singh iD

Nanomaterials · 22.03.2023 · 13 (6) · 1135

DOI: 10.3390/nano13061135 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 22.03.2023. Verfasst von Mamta und 5 weiteren Autor:innen. Beteiligte Einrichtung: Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As a promising solar absorber material, antimony selenide (Sb2Se3) has gained popularity. However, a lack of knowledge regarding material and device physics has slowed the rapid growth of Sb2Se3-based devices. This study compares the experimental and computational analysis of the photovoltaic performance of Sb2Se3-/CdS-based solar cells. We construct a specific device that may be produced in any lab using the thermal evaporation technique. Experimentally, efficiency is improved from 0.96% to 1.36% by varying the absorber’s thickness. Experimental information on Sb2Se3, such as the band gap and thickness, is used in the simulation to check the performance of the device after the optimization of various other parameters, including the series and shunt resistance, and a theoretical maximum efficiency of 4.42% is achieved. Further, the device’s efficiency is improved to 11.27% by optimizing the various parameters of the active layer. It thus is demonstrated that the band gap and thickness of active layers strongly affect the overall performance of a photovoltaic device.

Schlagwörter

Stichwörter der Autor:innen

I–VSCAPS-1DSb2Se3 thin filmthickness

Autor:innen und Institutionen

  • Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India.
  • CSIR-National Physical Laboratory, Dr. K. S. Krishnan Marg, New Delhi 110012, India.

ORCID-Profile: Raman Kumari, Chandan Yadav, Vidya Nand Singh

Zitieren

APA

Mamta, Kumari, R., Yadav, C., Kumar, R., Maurya, K. K., & Singh, V. N. (2023). Thermally Deposited Sb2Se3/CdS-Based Solar Cell: Experimental and Theoretical Analysis. Nanomaterials, 13(6), 1135. https://doi.org/10.3390/nano13061135

Vancouver

Mamta, Kumari R, Yadav C, Kumar R, Maurya KK, Singh VN. Thermally Deposited Sb2Se3/CdS-Based Solar Cell: Experimental and Theoretical Analysis. Nanomaterials. 2023;13(6):1135. doi:10.3390/nano13061135

BibTeX
@article{Mamta2023,
  author = {Mamta and Kumari, Raman and Yadav, Chandan and Kumar, Rahul and Maurya, Kamlesh Kumar and Singh, Vidya Nand},
  title = {Thermally Deposited Sb2Se3/CdS-Based Solar Cell: Experimental and Theoretical Analysis},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {6},
  pages = {1135},
  doi = {10.3390/nano13061135}
}
Kostenlos starten →