EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Combining Machine Learning and Molecular Dynamics to Predict Mechanical Properties and Microstructural Evolution of FeNiCrCoCu High-Entropy Alloys

Jingui Yu, Faping Yu, Qiang Fu, Gang Zhao, Caiyun Gong, Mingchao Wang iD, Qiaoxin Zhang

Nanomaterials · 07.03.2023 · 13 (6) · 968

DOI: 10.3390/nano13060968 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 07.03.2023. Verfasst von Jingui Yu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan 430070, China. Die Arbeit wurde bisher 44-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Fund of Hubei Key Laboratory of Mechanical Transmission and Manufacturing Engineering, Hubei Key Laboratory of Mechanical Transmission and Manufacturing Engineering at Wuhan University of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Compared with traditional alloys, high-entropy alloys have better mechanical properties and corrosion resistance. However, their mechanical properties and microstructural evolution behavior are unclear due to their complex composition. Machine learning has powerful data processing and analysis capabilities, that provides technical advantages for in-depth study of the mechanical properties of high-entropy alloys. Thus, we combined machine learning and molecular dynamics to predict the mechanical properties of FeNiCrCoCu high-entropy alloys. The optimal multiple linear regression machine learning algorithm predicts that the optimal composition is Fe33Ni32Cr11Co11Cu13 high-entropy alloy, with a tensile strength of 28.25 GPa. Furthermore, molecular dynamics is used to verify the predicted mechanical properties of high-entropy alloys, and it is found that the error between the tensile strength predicted by machine learning and the tensile strength obtained by molecular dynamics simulation is within 0.5%. Moreover, the tensile-compression asymmetry of Fe33Ni32Cr11Co11Cu13 high-entropy alloy increased with the increase of temperature and Cu content and the decrease of Fe content. This is due to the increase in stress caused by twinning during compression and the decrease in stress due to dislocation slip during stretching. Interestingly, high-entropy alloy coatings reduce the tensile-compression asymmetry of nickel; this is attributed to the reduced influence of dislocations and twinning at the interface between the high-entropy alloy and the nickel matrix.

Schlagwörter

Stichwörter der Autor:innen

high entropy alloymachine learningmechanical propertiesmolecular dynamics

Autor:innen und Institutionen

  • School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan 430070, China.
  • Hubei Key Laboratory of Mechanical Transmission and Manufacturing Engineering, Wuhan University of Science and Technology, Wuhan 430081, China.
  • Wuhan Institute of Marine Electric Propulsion, Wuhan 430064, China.
  • Centre for Theoretical and Computational Molecular Science, Australian Institute for Bioengineering and Nanotechnology, The University of Queensland, St Lucia, QLD 4072, Australia.

ORCID-Profile: Mingchao Wang

Förderung

  • Open Fund of Hubei Key Laboratory of Mechanical Transmission and Manufacturing Engineering
  • Hubei Key Laboratory of Mechanical Transmission and Manufacturing Engineering at Wuhan University of Science and Technology

Zitieren

APA

Yu, J., Yu, F., Fu, Q., Zhao, G., Gong, C., Wang, M., & Zhang, Q. (2023). Combining Machine Learning and Molecular Dynamics to Predict Mechanical Properties and Microstructural Evolution of FeNiCrCoCu High-Entropy Alloys. Nanomaterials, 13(6), 968. https://doi.org/10.3390/nano13060968

Vancouver

Yu J, Yu F, Fu Q, Zhao G, Gong C, Wang M, et al. Combining Machine Learning and Molecular Dynamics to Predict Mechanical Properties and Microstructural Evolution of FeNiCrCoCu High-Entropy Alloys. Nanomaterials. 2023;13(6):968. doi:10.3390/nano13060968

BibTeX
@article{Yu2023,
  author = {Yu, Jingui and Yu, Faping and Fu, Qiang and Zhao, Gang and Gong, Caiyun and Wang, Mingchao and Zhang, Qiaoxin},
  title = {Combining Machine Learning and Molecular Dynamics to Predict Mechanical Properties and Microstructural Evolution of FeNiCrCoCu High-Entropy Alloys},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {6},
  pages = {968},
  doi = {10.3390/nano13060968}
}
Kostenlos starten →