A Self-Powered High-Responsivity, Fast-Response-Speed Solar-Blind Ultraviolet Photodetector Based on CuO/β-Ga2O3 Heterojunction with Built-In Potential Control
Nanomaterials · 06.03.2023 · 13 (5) · 954
DOI: 10.3390/nano13050954 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 06.03.2023. Verfasst von Sangbin Park und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical Engineering, College of IT Convergence, Gachon University, 1342, Seongnam-daero, Sujeong-gu, Seongnam-si 13120, Gyeonggi-do,…. Die Arbeit wurde bisher 60-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, Gachon University.
Abstract (Originalsprache)
Controlling built-in potential can enhance the photoresponse performance of self-powered photodetectors. Among the methods for controlling the built-in potential of self-powered devices, postannealing is simpler, more efficient, and less expensive than ion doping and alternative material research. In this study, a CuO film was deposited on a β-Ga2O3 epitaxial layer via reactive sputtering with an FTS system, and a self-powered solar-blind photodetector was fabricated through a CuO/β-Ga2O3 heterojunction and postannealed at different temperatures. The postannealing process reduced the defects and dislocations at the interface between each layer and affected the electrical and structural properties of the CuO film. After postannealing at 300 °C, the carrier concentration of the CuO film increased from 4.24 × 1018 to 1.36 × 1020 cm−3, bringing the Fermi level toward the valence band of the CuO film and increasing the built-in potential of the CuO/β-Ga2O3 heterojunction. Thus, the photogenerated carriers were rapidly separated, increasing the sensitivity and response speed of the photodetector. The as-fabricated photodetector with 300 °C postannealing exhibited a photo-to-dark current ratio of 1.07 × 103; responsivity and detectivity of 30.3 mA/W and 1.10 × 1012 Jones, respectively; and fast rise and decay times of 12 ms and 14 ms, respectively. After three months of storage in an open-air space, the photocurrent density of the photodetector was maintained, indicating good stability with aging. These results suggest that the photocharacteristics of CuO/β-Ga2O3 heterojunction self-powered solar-blind photodetectors can be improved through built-in potential control using a postannealing process.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electrical Engineering, College of IT Convergence, Gachon University, 1342, Seongnam-daero, Sujeong-gu, Seongnam-si 13120, Gyeonggi-do, Republic of Korea.
ORCID-Profile: Jeongsoo Hong
Förderung
- Ministry of Trade, Industry and Energy
- Gachon University
Zitieren
APA
Park, S., Yoon, Y., Kim, H., Park, T., Kim, K., & Hong, J. (2023). A Self-Powered High-Responsivity, Fast-Response-Speed Solar-Blind Ultraviolet Photodetector Based on CuO/β-Ga2O3 Heterojunction with Built-In Potential Control. Nanomaterials, 13(5), 954. https://doi.org/10.3390/nano13050954
Vancouver
Park S, Yoon Y, Kim H, Park T, Kim K, Hong J. A Self-Powered High-Responsivity, Fast-Response-Speed Solar-Blind Ultraviolet Photodetector Based on CuO/β-Ga2O3 Heterojunction with Built-In Potential Control. Nanomaterials. 2023;13(5):954. doi:10.3390/nano13050954
BibTeX
@article{Park2023,
author = {Park, Sangbin and Yoon, Younghwa and Kim, Hyungmin and Park, Taejun and Kim, Kyunghwan and Hong, Jeongsoo},
title = {A Self-Powered High-Responsivity, Fast-Response-Speed Solar-Blind Ultraviolet Photodetector Based on CuO/β-Ga2O3 Heterojunction with Built-In Potential Control},
journal = {Nanomaterials},
year = {2023},
volume = {13},
number = {5},
pages = {954},
doi = {10.3390/nano13050954}
}
EUVIMED