Mechanical Reinforcement of ABS with Optimized Nano Titanium Nitride Content for Material Extrusion 3D Printing
Nanomaterials · 08.02.2023 · 13 (4) · 669
DOI: 10.3390/nano13040669 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 08.02.2023. Verfasst von Nectarios Vidakis und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Hellenic Mediterranean University, 71410 Heraklion, Greece. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Acrylonitrile Butadiene Styrene (ABS) nanocomposites were developed using Material Extrusion (MEX) Additive Manufacturing (AM) and Fused Filament Fabrication (FFF) methods. A range of mechanical tests was conducted on the produced 3D-printed structures to investigate the effect of Titanium Nitride (TiN) nanoparticles on the mechanical response of thermoplastic polymers. Detailed morphological characterization of the produced filaments and 3D-printed specimens was carried out using Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). High-magnification images revealed a direct impact of the TiN concentration on the surface characteristics of the nanocomposites, indicating a strong correlation with their mechanical performance. The chemical compositions of the raw and nanocomposite materials were thoroughly investigated by conducting Raman and Energy Dispersive Spectroscopy (EDS) measurements. Most of the mechanical properties were improved with the inclusion of TiN nanoparticles with a content of 6 wt. % to reach the optimum mechanical response overall. ABS/TiN 6 wt. % exhibits remarkable increases in flexural modulus of elasticity (42.3%) and toughness (54.0%) in comparison with pure ABS. The development of ABS/TiN nanocomposites with reinforced mechanical properties is a successful example that validates the feasibility and powerful abilities of MEX 3D printing in AM.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Hellenic Mediterranean University, 71410 Heraklion, Greece.
- Department of Electronic Engineering, Hellenic Mediterranean University, 73133 Chania, Greece.
- Institute of Molecular Biology and Biotechnology, Foundation for Research and Technology-Hellas, 71110 Heraklion, Greece.
- Department of Electrical & Computer Engineering, Hellenic Mediterranean University, 71410 Heraklion, Greece.
ORCID-Profile: Panagiotis Mangelis, Markos Petousis, Nikolaos Mountakis, Vassilis Papadakis, Dimitris Tsikritzis
Zitieren
APA
Vidakis, N., Mangelis, P., Petousis, M., Mountakis, N., Papadakis, V., Moutsopoulou, A., & Tsikritzis, D. (2023). Mechanical Reinforcement of ABS with Optimized Nano Titanium Nitride Content for Material Extrusion 3D Printing. Nanomaterials, 13(4), 669. https://doi.org/10.3390/nano13040669
Vancouver
Vidakis N, Mangelis P, Petousis M, Mountakis N, Papadakis V, Moutsopoulou A, et al. Mechanical Reinforcement of ABS with Optimized Nano Titanium Nitride Content for Material Extrusion 3D Printing. Nanomaterials. 2023;13(4):669. doi:10.3390/nano13040669
BibTeX
@article{Vidakis2023,
author = {Vidakis, Nectarios and Mangelis, Panagiotis and Petousis, Markos and Mountakis, Nikolaos and Papadakis, Vassilis and Moutsopoulou, Amalia and Tsikritzis, Dimitris},
title = {Mechanical Reinforcement of ABS with Optimized Nano Titanium Nitride Content for Material Extrusion 3D Printing},
journal = {Nanomaterials},
year = {2023},
volume = {13},
number = {4},
pages = {669},
doi = {10.3390/nano13040669}
}
EUVIMED