Triple-Band Square Split-Ring Resonator Metamaterial Absorber Design with High Effective Medium Ratio for 5G Sub-6 GHz Applications
Nanomaterials · 04.01.2023 · 13 (2) · 222
DOI: 10.3390/nano13020222 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 04.01.2023. Verfasst von Mohammad Lutful Hakim und 6 weiteren Autor:innen. Beteiligte Einrichtung: Pusat Sains Ankasa (ANGKASA), Institut Perubahan Iklim, Universiti Kebangsaan Malaysia (UKM), Bangi 43600, Selangor, Malaysia. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National University of Malaysia, university research grant of Universiti Kebangsaan Malaysia.
Abstract (Originalsprache)
This article proposes a square split-ring resonator (SSRR) metamaterial absorber (MMA) for sub-6 GHz application. The unit cell of the MMA was designed and fabricated on commercially available low-cost FR-4 substrate material with a dielectric constant o 4.3. The higher effective medium ratio (EMR) of the designed unit cell shows the compactness of the MMA. The dimension of the unit cell is 9.5 × 9.5 × 1.6 mm3, which consists of two split rings and two arms with outer SSRR. The proposed MMA operates at 2.5 GHz, 4.9 GHz, and 6 GHz frequency bands with a 90% absorption peak and shows a single negative metamaterial property. The E-field, H-field, and surface current are also explored in support of absorption analysis. Moreover, the equivalent circuit model of the proposed MMA is modelled and simulated to validate the resonance behavior of the MMA structure. Finally, the proposed MMA can be used for the specific frequency bands of 5G applications such as signal absorption, crowdsensing, SAR reduction, etc.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Pusat Sains Ankasa (ANGKASA), Institut Perubahan Iklim, Universiti Kebangsaan Malaysia (UKM), Bangi 43600, Selangor, Malaysia.
- Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM), Bangi 43600, Selangor, Malaysia.
- Department of Computer Science and Engineering (CSE), International Islamic University Chittagong (IIUC), Kumira, Chattogram 4318, Bangladesh.
- Wireless Communication Centre, Universiti Teknologi Malaysia, Skudai 81310, Johor, Malaysia.
- Faculty of Engineering (FOE), Multimedia University, Persiaran Multimedia, Cyberjaya 63100, Selangor, Malaysia.
- Department of Electrical Engineering, College of Engineering, Taif University, P.O. Box 11099, Taif 21944, Saudi Arabia.
ORCID-Profile: Mohammad Lutful Hakim, Mohammad Tariqul Islam, Touhidul Alam, Badariah Bais, Mohamed S Soliman
Förderung
- National University of Malaysia
- university research grant of Universiti Kebangsaan Malaysia
Zitieren
APA
Hakim, M. L., Islam, M. T., Alam, T., Abdul Rahim, S. K., Bais, B., Islam, M. S., & Soliman, M. S. (2023). Triple-Band Square Split-Ring Resonator Metamaterial Absorber Design with High Effective Medium Ratio for 5G Sub-6 GHz Applications. Nanomaterials, 13(2), 222. https://doi.org/10.3390/nano13020222
Vancouver
Hakim ML, Islam MT, Alam T, Abdul Rahim SK, Bais B, Islam MS, et al. Triple-Band Square Split-Ring Resonator Metamaterial Absorber Design with High Effective Medium Ratio for 5G Sub-6 GHz Applications. Nanomaterials. 2023;13(2):222. doi:10.3390/nano13020222
BibTeX
@article{Hakim2023,
author = {Hakim, Mohammad Lutful and Islam, Mohammad Tariqul and Alam, Touhidul and Abdul Rahim, Sharul Kamal and Bais, Badariah and Islam, Md Shabiul and Soliman, Mohamed S},
title = {Triple-Band Square Split-Ring Resonator Metamaterial Absorber Design with High Effective Medium Ratio for 5G Sub-6 GHz Applications},
journal = {Nanomaterials},
year = {2023},
volume = {13},
number = {2},
pages = {222},
doi = {10.3390/nano13020222}
}
EUVIMED