EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Situ Study of Twin Boundary Stability in Nanotwinned Copper Pillars under Different Strain Rates

Shou-Yi Chang iD, Yi-Chung Huang, Shao-Yi Lin, Chia-Ling Lu, Chih Chen iD, Ming Dao iD

Nanomaterials · 01.01.2023 · 13 (1) · 190

DOI: 10.3390/nano13010190 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 01.01.2023. Verfasst von Shou-Yi Chang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology, Taiwan, National Science Foundation (NSF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The nanoscopic deformation of ⟨111⟩ nanotwinned copper nanopillars under strain rates between 10−5/s and 5 × 10−4/s was studied by using in situ transmission electron microscopy. The correlation among dislocation activity, twin boundary instability due to incoherent twin boundary migration and corresponding mechanical responses was investigated. Dislocations piled up in the nanotwinned copper, giving rise to significant hardening at relatively high strain rates of 3–5 × 10−4/s. Lower strain rates resulted in detwinning and reduced hardening, while corresponding deformation mechanisms are proposed based on experimental results. At low/ultralow strain rates below 6 × 10−5/s, dislocation activity almost ceased operating, but the migration of twin boundaries via the 1/4 ⟨101¯ ⟩ kink-like motion of atoms is suggested as the detwinning mechanism. At medium strain rates of 1–2 × 10−4/s, detwinning was decelerated likely due to the interfered kink-like motion of atoms by activated partial dislocations, while dislocation climb may alternatively dominate detwinning. These results indicate that, even for the same nanoscale twin boundary spacing, different nanomechanical deformation mechanisms can operate at different strain rates.

Schlagwörter

Stichwörter der Autor:innen

atom motiondetwinningdislocation activityin situ nanoscopic deformationnanotwinned coppertwin boundary

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan.
  • Department of Materials Science and Engineering, National Chung Hsing University, Taichung 40227, Taiwan.
  • Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu 30010, Taiwan.
  • Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.

ORCID-Profile: Shou-Yi Chang, Chih Chen, Ming Dao

Förderung

  • Ministry of Science and Technology, Taiwan
  • National Science Foundation (NSF)

Zitieren

APA

Chang, S. Y., Huang, Y. C., Lin, S. Y., Lu, C. L., Chen, C., & Dao, M. (2023). In Situ Study of Twin Boundary Stability in Nanotwinned Copper Pillars under Different Strain Rates. Nanomaterials, 13(1), 190. https://doi.org/10.3390/nano13010190

Vancouver

Chang SY, Huang YC, Lin SY, Lu CL, Chen C, Dao M. In Situ Study of Twin Boundary Stability in Nanotwinned Copper Pillars under Different Strain Rates. Nanomaterials. 2023;13(1):190. doi:10.3390/nano13010190

BibTeX
@article{Chang2023,
  author = {Chang, Shou-Yi and Huang, Yi-Chung and Lin, Shao-Yi and Lu, Chia-Ling and Chen, Chih and Dao, Ming},
  title = {In Situ Study of Twin Boundary Stability in Nanotwinned Copper Pillars under Different Strain Rates},
  journal = {Nanomaterials},
  year = {2023},
  volume = {13},
  number = {1},
  pages = {190},
  doi = {10.3390/nano13010190}
}
Kostenlos starten →