EUVIMEDEUVIMED entdecken
StudienprotokollOpen Access · CC BY 4.0

A Production and Fractionation Protocol for Polyvinyl Chloride Microplastics

Siebe Lievens, Evelynn Vervoort iD, Giulia Poma iD, Adrian Covaci iD, Mik Van Der Borght iD

Methods and Protocols · 31.01.2023 · 6 (1) · 15

DOI: 10.3390/mps6010015 ↗

Kurz gefasst

Studienprotokoll in der Zeitschrift Methods and Protocols, online erschienen am 31.01.2023. Verfasst von Siebe Lievens und 4 weiteren Autor:innen. Beteiligte Einrichtung: Research Group for Insect Production and Processing, Faculty of Engineering Technology, Department of Microbial and Molecular Systems (M2S), KU Leuve…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Foundation - Flanders, Flemish Government, Research Foundation—Flanders (FWO).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Concerns about the presence of microplastics in the environment has increased in recent years, prompting more attention from scientists. Thorough exposure studies using artificially produced microplastics containing additives are required to assess their potentially hazardous effects. Therefore, an efficient microplastic production and fractionation protocol was established using a cryogenic grinding and wet-sieving approach. The developed cryogenic grinding method was able to produce (20–40 g/h) polyvinyl chloride (PVC) microplastics having a volume-weighted mean particle size of 391 µm and a span of 2.12. Performing a second grinding cycle on the same particles resulted in microplastics which were smaller (volume-weighted mean size = 219 μm) and had a narrower particle size distribution (span = 1.59). In addition, the microplastics were also fractionated into different particle size ranges using a vibrating wet-sieving tower. The latter technique allowed separating 10 g of PVC microplastics into seven different fractions using six sieves (Ø 200 mm) for 30 min while shaking. By using the developed method, PVC microplastics could easily be made and fractionated into desired particle-size ranges. The proposed protocol could also be adjusted to produce and fractionate microplastics of other plastics.

Schlagwörter

Stichwörter der Autor:innen

PVCcryogenic grindingmicroplasticsseparationwet sieving

Autor:innen und Institutionen

  • Research Group for Insect Production and Processing, Faculty of Engineering Technology, Department of Microbial and Molecular Systems (M2S), KU Leuven Campus Geel, Kleinhoefstraat 4, 2440 Geel, Belgium.
  • Toxicological Centre, Faculty of Pharmaceutical, Biomedical and Veterinary Sciences, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Antwerp, Belgium.

ORCID-Profile: Evelynn Vervoort, Giulia Poma, Adrian Covaci, Mik Van Der Borght

Förderung

  • Research Foundation - Flanders
  • Flemish Government
  • Research Foundation—Flanders (FWO)
  • KU Leuven

Zitieren

APA

Lievens, S., Vervoort, E., Poma, G., Covaci, A., & Van Der Borght, M. (2023). A Production and Fractionation Protocol for Polyvinyl Chloride Microplastics. Methods and Protocols, 6(1), 15. https://doi.org/10.3390/mps6010015

Vancouver

Lievens S, Vervoort E, Poma G, Covaci A, Van Der Borght M. A Production and Fractionation Protocol for Polyvinyl Chloride Microplastics. Methods and Protocols. 2023;6(1):15. doi:10.3390/mps6010015

BibTeX
@article{Lievens2023,
  author = {Lievens, Siebe and Vervoort, Evelynn and Poma, Giulia and Covaci, Adrian and Van Der Borght, Mik},
  title = {A Production and Fractionation Protocol for Polyvinyl Chloride Microplastics},
  journal = {Methods and Protocols},
  year = {2023},
  volume = {6},
  number = {1},
  pages = {15},
  doi = {10.3390/mps6010015}
}
Kostenlos starten →