Optimization of Reduced Graphene Oxide/Titanium Dioxide-Coated Polyurethane Foams as Novel Floating Photocatalysts for Water Decontamination
Molecules · 06.08.2026 · 31 (15) · 2733
DOI: 10.3390/molecules31152733 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, online erschienen am 06.08.2026. Verfasst von Natalia Elia und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Materials and Chemical Engineering "Giulio Natta", Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy. Die Arbeit nennt 121 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministero dell'università e della ricerca, Italian Ministry of University and Research, European Union.
Abstract (Originalsprache)
Titanium dioxide (TiO2) photocatalysis is a promising sustainable solution for water decontamination; however, the industrial application of TiO2 is hindered by its wide band gap and high handling and recovery costs. This work proposes to overcome these issues by developing a composite coating of nanopowder TiO2 and reduced graphene oxide (rGO) applied onto commercial polyurethane (PU) foams by means of a simple, low-energy dip-coating process designed to enhance pollutant adsorption and photocatalytic activity. The rGO-TiO2 coating was optimized by exploring different surface pre-treatments of the PU foams, the deposition of rGO-TiO2 multilayers, and the variation in the rGO-TiO2 mass ratio (1:3, 1:4, and 1:5). The prepared materials were characterized by optical microscopy, SEM-EDX, DSC, and thermogravimetry, while the stability of the coating was preliminarily evaluated through ultrasonic tests. The water decontamination capability of the coated foams was investigated by adsorption and UV-Vis photodegradation tests using a 3 mg/L aqueous solution of Rhodamine B (RhB) as a model contaminant. The results demonstrated that the rGO-TiO2 1:3-coated samples achieved complete RhB photodegradation within 90 min, with a pseudo-first-order kinetic constant of 0.0446 1/min. Moreover, pre-treating the foam with a 3 M NaOH solution improved coating adhesion onto the PU substrate while maintaining comparable decontamination efficiency.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemistry, Materials and Chemical Engineering "Giulio Natta", Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy.
- Laboratory of Catalysis and Catalytic Processes, Department of Energy, Politecnico di Milano, Via La Masa 34, 20156 Milano, Italy.
ORCID-Profile: Natalia Elia, Anna Dotti, Andrea Basso Peressut, Roberto Matarrese, Saverio Latorrata
Förderung
- Ministero dell'università e della ricerca
- Italian Ministry of University and Research
- European Union
Zitieren
APA
Elia, N., De Rosa, F., Dotti, A., Basso Peressut, A., Matarrese, R., & Latorrata, S. (2026). Optimization of Reduced Graphene Oxide/Titanium Dioxide-Coated Polyurethane Foams as Novel Floating Photocatalysts for Water Decontamination. Molecules, 31(15), 2733. https://doi.org/10.3390/molecules31152733
Vancouver
Elia N, De Rosa F, Dotti A, Basso Peressut A, Matarrese R, Latorrata S. Optimization of Reduced Graphene Oxide/Titanium Dioxide-Coated Polyurethane Foams as Novel Floating Photocatalysts for Water Decontamination. Molecules. 2026;31(15):2733. doi:10.3390/molecules31152733
BibTeX
@article{Elia2026,
author = {Elia, Natalia and De Rosa, Francesca and Dotti, Anna and Basso Peressut, Andrea and Matarrese, Roberto and Latorrata, Saverio},
title = {Optimization of Reduced Graphene Oxide/Titanium Dioxide-Coated Polyurethane Foams as Novel Floating Photocatalysts for Water Decontamination},
journal = {Molecules},
year = {2026},
volume = {31},
number = {15},
pages = {2733},
doi = {10.3390/molecules31152733}
}
EUVIMED