EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cellulose-Based Oleogels via One-Step Cross-Linking for Lubrication

Yuhao Fang, Gaobo Lou iD, Hongjiang Yu, Lina Liu, Yifan Chen

Molecules · 21.07.2026 · 31 (14) · 2538

DOI: 10.3390/molecules31142538 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 21.07.2026. Verfasst von Yuhao Fang und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou 311300, China. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Talent Start-up Project of Zhejiang A&F University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, novel and stable cellulose-based oleogels with tunable rheological properties were successfully developed for lubrication applications via cross-linking reactions of epoxidized soybean oil (ESO), microcrystalline cellulose (MCC), and isocyanate. This cross-linking strategy not only overcomes the incompatibility issue arising from the polarity difference between MCC and ESO but also enables precise control over the oleogels’ rheological behavior by tailoring the cross-linking density. The resulting oleogels exhibit excellent thermal stability, with an initial decomposition temperature (T5%) of approximately 300 °C. Furthermore, oxidation resistance is significantly enhanced with increasing cross-linking density, resulting in a substantial increase in the oxidation induction time (OIT) from 5 to 79 min at 210 °C. Rheological characterization reveals that the oleogels exhibit typical shear-thinning and thixotropic behavior. The plateau modulus (GN0) exhibits a positive correlation with cross-linking density, accompanied by a simultaneous improvement in structural recovery ability. Tribological tests show that the friction coefficient increases with the cross-linking degree, while four-ball tests indicate that the extreme-pressure load-carrying capacity is governed mainly by the nature of the base oil in addition to the cross-linking density of the gel network. This work provides a promising strategy for the development of high-performance and customizable bio-based lubricating materials.

Schlagwörter

Stichwörter der Autor:innen

celluloseepoxidized soybean oiloleogelsrheologytribology

Autor:innen und Institutionen

  • College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou 311300, China.
  • Zhejiang Key Laboratory of Green and Low-Carbon Utilization Technology of Agriculture and Forestry Biomass, Hangzhou 311300, China.

ORCID-Profile: Gaobo Lou

Förderung

  • Talent Start-up Project of Zhejiang A&F University

Zitieren

APA

Fang, Y., Lou, G., Yu, H., Liu, L., & Chen, Y. (2026). Cellulose-Based Oleogels via One-Step Cross-Linking for Lubrication. Molecules, 31(14), 2538. https://doi.org/10.3390/molecules31142538

Vancouver

Fang Y, Lou G, Yu H, Liu L, Chen Y. Cellulose-Based Oleogels via One-Step Cross-Linking for Lubrication. Molecules. 2026;31(14):2538. doi:10.3390/molecules31142538

BibTeX
@article{Fang2026,
  author = {Fang, Yuhao and Lou, Gaobo and Yu, Hongjiang and Liu, Lina and Chen, Yifan},
  title = {Cellulose-Based Oleogels via One-Step Cross-Linking for Lubrication},
  journal = {Molecules},
  year = {2026},
  volume = {31},
  number = {14},
  pages = {2538},
  doi = {10.3390/molecules31142538}
}
Kostenlos starten →