CPCM/OSS Backfill Materials: Enhanced Thermal Properties and Heat Transfer Performance for Ground Heat Exchangers in Ground Source Heat Pump Systems
Molecules · 01.06.2026 · 31 (11) · 1892
DOI: 10.3390/molecules31111892 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, online erschienen am 01.06.2026. Verfasst von Dongyi Zhou und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy and Mechanical Engineering, Hunan University of Humanities, Science and Technology, Loudi 417000, China. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Science and Technology of Hunan Province, Education Department of Hunan Province, The Ningbo Longhui Electromechanical Engineering Co., Ltd..
Abstract (Originalsprache)
This study focuses on optimizing backfill materials to enhance the heat transfer performance of ground heat exchangers (GHEs) in ground source heat pump (GSHP) systems. A series of composite phase change material/original sand soil (CPCM/OSS) backfill materials was prepared using capric acid–myristic acid/expanded graphite (CA-MA/EG) at mass ratios of 5%, 10%, 15%, and 20%. Thermal conductivity testing, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), laboratory heat transfer tests, and 3D numerical simulations under typical intermittent summer conditions were systematically conducted. The results show that thermal conductivity, specific heat capacity, and thermal storage coefficient all increase with rising moisture content and CPCM dosage. The newly developed CPCM/OSS backfill material significantly improves the heat transfer performance of GHEs. Comprehensive thermophysical characterization indicates that the 10 wt% CPCM sample is the optimal formulation. Laboratory tests demonstrate that, relative to pure OSS backfill, the 10 wt% CPCM-doped CPCM/OSS raises the average soil temperature by approximately 2.5–2.8 °C. Numerical simulations over three consecutive days show that, relative to pure OSS backfill, the 10 wt% CPCM-doped composite enhances the heat exchange capacity per linear meter of the GHEs by 8.8%. The newly developed CPCM/OSS backfill material significantly improves the heat transfer performance of GHEs. It provides a feasible material solution and technical reference for GSHP system design.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Energy and Mechanical Engineering, Hunan University of Humanities, Science and Technology, Loudi 417000, China.
- School of Energy Science and Engineering, Central South University, Changsha 410083, China.
ORCID-Profile: Dongyi Zhou
Förderung
- Department of Science and Technology of Hunan Province
- Education Department of Hunan Province
- The Ningbo Longhui Electromechanical Engineering Co., Ltd.
- The Integration and Innovation Project of Talent Chain, Capital Chain and Industry Chain, Loudi Municipal Bureau of Science and Technology, Hunan Province
- Provincial Natural Science Foundation of Hunan
- Ningbo Longhui Electromechanical Engineering Co., Ltd.
- Integration and Innovation Project of Talent Chain, Capital Chain and Industry Chain, Loudi Municipal Bureau of Science and Technology, Hunan Province
- Education Department Foundation of Hunan Provincial
Zitieren
APA
Zhou, D., Zhou, F., Yuan, J., & Liu, Y. (2026). CPCM/OSS Backfill Materials: Enhanced Thermal Properties and Heat Transfer Performance for Ground Heat Exchangers in Ground Source Heat Pump Systems. Molecules, 31(11), 1892. https://doi.org/10.3390/molecules31111892
Vancouver
Zhou D, Zhou F, Yuan J, Liu Y. CPCM/OSS Backfill Materials: Enhanced Thermal Properties and Heat Transfer Performance for Ground Heat Exchangers in Ground Source Heat Pump Systems. Molecules. 2026;31(11):1892. doi:10.3390/molecules31111892
BibTeX
@article{Zhou2026,
author = {Zhou, Dongyi and Zhou, Fanchen and Yuan, Jiawei and Liu, Yicai},
title = {CPCM/OSS Backfill Materials: Enhanced Thermal Properties and Heat Transfer Performance for Ground Heat Exchangers in Ground Source Heat Pump Systems},
journal = {Molecules},
year = {2026},
volume = {31},
number = {11},
pages = {1892},
doi = {10.3390/molecules31111892}
}
EUVIMED