EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Crosslinker-Free, Printable Alginate–Boronic Acid Hydrogel Adhesive with Enhanced Mechanical Performance for Soft Tissue Fixation

Anna Marszałek, Zuzanna Kurzępa, Mikołaj Gąbka, Anna Ścisłowska-Czarnecka, Ewa Stodolak-Zych iD

Molecules · 2026

DOI: 10.3390/molecules31050829 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, 2026. Verfasst von Anna Marszałek und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomaterials and Composites, AGH University of Krakow, 30-059 Kraków, Poland. Hauptthemen laut MEDLINE: Alginates, Boronic Acids, Hydrogels, Tissue Adhesives. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish State Ministry of Education and Science, Program IDUB "Excellence initiative - research University", subvention of the Polish State Ministry of Education and Science for the AGH University of Krakow, Faculty of Materials Science and Ceramics.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tissue adhesives offer a promising alternative to traditional sutures and staples, particularly in situations requiring rapid, minimally invasive wound closure. To address the limitations of commercially available cyanoacrylate-based adhesives, numerous hydrogel adhesives have been developed. This study presents the synthesis and characterisation of an alginate–aminophenylboronic acid (Alg-APBA) hydrogel adhesive, optimised for bioprinting as a method allowing us to control the thickness of the adhesive layer. The adhesive combines the biocompatibility of alginate with the pH-responsive bonding ability of boronic acid groups, eliminating the need for oxidative crosslinkers. Successful conjugation of APBA to alginate was confirmed via 1H NMR, FTIR and UV-VIS spectroscopy, with a degree of substitution reaching approximately 46% or ~0.22 mol%. Rheological analysis demonstrated shear-thinning and self-healing properties suitable for bioprinting, achieving a high print fidelity (Pr ratio = 0.99 ± 0.08) and repeatability. Mechanical testing showed a shear strength of 19.0 ± 0.5 kPa and an interfacial toughness of 58.0 ± 2.11 J/m2, exceeding those of commercial fibrin adhesives. Additionally, the adhesive joint remained stable after one week of incubation in an acidic environment. The material demonstrated biocompatibility during in vitro testing with keratinocytes and fibroblast cells. These results indicate that Alg-APBA is a strong, biocompatible and printable hydrogel adhesive with potential applications in soft tissue implant fixation.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AlginatesBoronic AcidsHydrogelsTissue AdhesivesAnimalsBiocompatible MaterialsMaterials TestingHumansBioprintingRheology

Stichwörter der Autor:innen

alginatebioprintinghydrogel adhesivesoft tissue fixation

Substanzen

AlginatesBoronic AcidsHydrogelsTissue AdhesivesBiocompatible Materials

Autor:innen und Institutionen

  • Department of Biomaterials and Composites, AGH University of Krakow, 30-059 Kraków, Poland.
  • Institute of Applied Sciences, University of Physical Culture in Kraków, 31-571 Kraków, Poland.

ORCID-Profile: Ewa Stodolak-Zych

Förderung

  • Polish State Ministry of Education and Science
  • Program IDUB "Excellence initiative - research University"
  • subvention of the Polish State Ministry of Education and Science for the AGH University of Krakow, Faculty of Materials Science and Ceramics
  • IDUB “Excellence initiative—research University” programme for the AGH University of Krakow

Zitieren

APA

Marszałek, A., Kurzępa, Z., Gąbka, M., Ścisłowska-Czarnecka, A., & Stodolak-Zych, E. (2026). Crosslinker-Free, Printable Alginate–Boronic Acid Hydrogel Adhesive with Enhanced Mechanical Performance for Soft Tissue Fixation. Molecules. https://doi.org/10.3390/molecules31050829

Vancouver

Marszałek A, Kurzępa Z, Gąbka M, Ścisłowska-Czarnecka A, Stodolak-Zych E. Crosslinker-Free, Printable Alginate–Boronic Acid Hydrogel Adhesive with Enhanced Mechanical Performance for Soft Tissue Fixation. Molecules. 2026. doi:10.3390/molecules31050829

BibTeX
@article{Marszaek2026,
  author = {Marszałek, Anna and Kurzępa, Zuzanna and Gąbka, Mikołaj and Ścisłowska-Czarnecka, Anna and Stodolak-Zych, Ewa},
  title = {Crosslinker-Free, Printable Alginate–Boronic Acid Hydrogel Adhesive with Enhanced Mechanical Performance for Soft Tissue Fixation},
  journal = {Molecules},
  year = {2026},
  doi = {10.3390/molecules31050829}
}
Kostenlos starten →