EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bioplastic Production Using Natural Extracts with Cellulose Assisted by Experimental and Computational Screening

Lizbeth Zamora-Mendoza iD, Jhonny Caicho iD, José R Mora iD, Daniela Negrete-Bolagay iD, Victor H Guerrero iD, Noroska G S Mogollón iD, Melanie Ochoa-Ocampo, Jefferson Pastuña-Fasso iD, José F Álvarez Barreto iD, Sebastián Ponce iD, Juan Paredes iD, Henry Erazo iD und 3 weitere

Molecules · 26.06.2025 · 30 (13) · 2752

DOI: 10.3390/molecules30132752 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 26.06.2025. Verfasst von Lizbeth Zamora-Mendoza und 14 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ingeniería Química, Colegio de Ciencias e Ingenierías, Universidad San Francisco de Quito (USFQ), Quito 170901, Ecuador. Hauptthemen laut MEDLINE: Cellulose, Plant Extracts, Biological Products, Plastics. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Corporación Ecuatoriana para el Desarrollo de la Investigación y la Academia (CEDIA).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing demand for sustainable and environmentally friendly materials has prompted intensive research into developing bioplastics as viable alternatives to conventional petroleum-derived plastics. Here, we report a novel approach to bioplastic production by employing plant extract-based solvents to partially dissolve cellulose, a fundamental biopolymer precursor. Using plant-derived solvents addresses concerns surrounding the environmental impact of traditional solvent-based processes, as per the principles of green chemistry. Using computational screening, some natural products were identified from the integrated database resource MEGx. Six natural sources were selected based on their molecular weight, high pKa, and chemical classification. Thin-layer chromatography (TLC) and column chromatography confirmed the presence of molecules in the extracts. Bioplastics were prepared with 1, 3, 6, 10, and 15 wt.% plant extract concentrations. Control samples without conventional dissolved and positive controls were also studied to compare their properties with novel bioplastics. Chemical characterization and biodegradability tests were performed. Degradation in water and soil tests for 35 days showed that the biodegradability of the bioplastics with natural extracts at higher concentrations was faster than that of the control samples. By day 35, bioplastics containing 15 wt.% of the D1 W extract showed rapid degradation, with higher weight loss compared with the conventional controls. The positive control (C4), containing NaOH and glycerol, degraded more slowly than the plant extract-based formulations. Also, the test indicated that the natural dissolvent’s influence on the water uptake of the material produced a better performance than the control samples. The surfaces of the bioplastic formulations were analyzed using a scanning electron microscope (SEM) at different magnifications. The findings presented here hold promise for advancing the field of bioplastics and contributing to the sustainable utilization of plant resources for eco-friendly material production.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CellulosePlant ExtractsBiological ProductsPlasticsBiodegradable PlasticsBiodegradation, EnvironmentalSolvents

Stichwörter der Autor:innen

bioplasticcellulosenatural dissolventplant extract

Substanzen

CellulosePlant ExtractsBiological ProductsSolventsPlasticsBiodegradable Plastics

Autor:innen und Institutionen

  • Departamento de Ingeniería Química, Colegio de Ciencias e Ingenierías, Universidad San Francisco de Quito (USFQ), Quito 170901, Ecuador.
  • Departamento de Materiales, Escuela Politécnica Nacional (EPN), Quito 170143, Ecuador.
  • Biomolecules Discovery Group, Universidad Regional Amazónica Ikiam, Tena 150101, Ecuador.
  • Laboratorio de Productos Naturales, Universidad Regional Amazónica Ikiam, Km 7 Vía Muyuna, Tena 1701518, Ecuador.
  • Facultad de Ingeniería Civil y Mecánica, Universidad Técnica de Ambato (UTA), Ambato 180207, Ecuador.
  • Institute for Energy and Materials, Colegio de Ciencias e Ingenierías, Universidad San Francisco de Quito (USFQ), Quito 170901, Ecuador.

ORCID-Profile: Lizbeth Zamora-Mendoza, Jhonny Caicho, José R Mora, Daniela Negrete-Bolagay, Victor H Guerrero, Noroska G S Mogollón, Jefferson Pastuña-Fasso, José F Álvarez Barreto, Sebastián Ponce, Juan Paredes, Henry Erazo, Patricia I Pontón, Marco León, Frank Alexis

Förderung

  • Corporación Ecuatoriana para el Desarrollo de la Investigación y la Academia (CEDIA)

Zitieren

APA

Zamora-Mendoza, L., Caicho, J., Mora, J. R., Negrete-Bolagay, D., Guerrero, V. H., Mogollón, N. G. S., Ochoa-Ocampo, M., Pastuña-Fasso, J., Álvarez Barreto, J. F., Ponce, S., Paredes, J., Erazo, H., Pontón, P. I., León, M., & Alexis, F. (2025). Bioplastic Production Using Natural Extracts with Cellulose Assisted by Experimental and Computational Screening. Molecules, 30(13), 2752. https://doi.org/10.3390/molecules30132752

Vancouver

Zamora-Mendoza L, Caicho J, Mora JR, Negrete-Bolagay D, Guerrero VH, Mogollón NGS, et al. Bioplastic Production Using Natural Extracts with Cellulose Assisted by Experimental and Computational Screening. Molecules. 2025;30(13):2752. doi:10.3390/molecules30132752

BibTeX
@article{ZamoraMendoza2025,
  author = {Zamora-Mendoza, Lizbeth and Caicho, Jhonny and Mora, José R and Negrete-Bolagay, Daniela and Guerrero, Victor H and Mogollón, Noroska G S and Ochoa-Ocampo, Melanie and Pastuña-Fasso, Jefferson and Álvarez Barreto, José F and Ponce, Sebastián and Paredes, Juan and Erazo, Henry and Pontón, Patricia I and León, Marco and Alexis, Frank},
  title = {Bioplastic Production Using Natural Extracts with Cellulose Assisted by Experimental and Computational Screening},
  journal = {Molecules},
  year = {2025},
  volume = {30},
  number = {13},
  pages = {2752},
  doi = {10.3390/molecules30132752}
}
Kostenlos starten →