Mechanical and Thermal Performance of In-Situ Synthesized PDMS-SiO2 Composite as Electrical Insulating Coatings
Molecules · 09.05.2025 · 30 (10) · 2107
DOI: 10.3390/molecules30102107 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, online erschienen am 09.05.2025. Verfasst von Aldo Cordoba und 4 weiteren Autor:innen. Beteiligte Einrichtung: Graduate and Research Division, Engineering Faculty, Universidad Autónoma de Querétaro, Cerro de las Campanas, Santiago de Querétaro 76010, Querétaro…. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad Autónoma de Querétaro, SECIHTI, FONFIVE-2024.
Abstract (Originalsprache)
Polydimethylsiloxane (PDMS) has been extensively employed in electrical insulation applications owing to its excellent thermal stability, hydrophobicity, and dielectric properties. However, its inherent mechanical limitations require structural reinforcement to enhance its performance under more demanding operational conditions. In this study, the mechanical, thermal, and surface properties of PDMS-SiO2 nanocomposites synthesized via in situ sol–gel process was systematically investigated. The influence of different SiO2 nanoparticle concentrations (5, 10, and 15 wt%), sol–gel catalyst type (acidic and alkaline), and tetraethyl orthosilicate (TEOS) crosslinking agent ratios (15:1, 10:1, 5:1) was evaluated. Tensile mechanical testing, dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA) revealed that the incorporation of SiO2 notably improved both the mechanical strength and thermal stability of the composites. The 5-15b and 10-15a composites exhibited the highest tensile stress and viscoelastic modulus among all samples. Furthermore, the composites retained key functional properties, including hydrophobicity, high volumetric electrical resistivity (~1011 Ω·cm), and strong adhesion. These findings confirm the potential of in situ PDMS-SiO2 nanocomposites for use as high-performance insulating coatings in advanced electrical applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Graduate and Research Division, Engineering Faculty, Universidad Autónoma de Querétaro, Cerro de las Campanas, Santiago de Querétaro 76010, Querétaro, Mexico.
- Centro de Investigación Científica de Yucatán, Unidad de Materiales, C. 43 No. 130 x 32 y 34, Col. Chuburná de Hidalgo, Mérida 97205, Yucatán, Mexico.
ORCID-Profile: Aldo Cordoba, Rossana Faride Vargas-Coronado, Rodrigo Velázquez-Castillo, Juan Valerio Cauich-Rodríguez, Karen Esquivel
Förderung
- Universidad Autónoma de Querétaro
- SECIHTI
- FONFIVE-2024
Zitieren
APA
Cordoba, A., Vargas-Coronado, R. F., Velázquez-Castillo, R., Cauich-Rodríguez, J. V., & Esquivel, K. (2025). Mechanical and Thermal Performance of In-Situ Synthesized PDMS-SiO2 Composite as Electrical Insulating Coatings. Molecules, 30(10), 2107. https://doi.org/10.3390/molecules30102107
Vancouver
Cordoba A, Vargas-Coronado RF, Velázquez-Castillo R, Cauich-Rodríguez JV, Esquivel K. Mechanical and Thermal Performance of In-Situ Synthesized PDMS-SiO2 Composite as Electrical Insulating Coatings. Molecules. 2025;30(10):2107. doi:10.3390/molecules30102107
BibTeX
@article{Cordoba2025,
author = {Cordoba, Aldo and Vargas-Coronado, Rossana Faride and Velázquez-Castillo, Rodrigo and Cauich-Rodríguez, Juan Valerio and Esquivel, Karen},
title = {Mechanical and Thermal Performance of In-Situ Synthesized PDMS-SiO2 Composite as Electrical Insulating Coatings},
journal = {Molecules},
year = {2025},
volume = {30},
number = {10},
pages = {2107},
doi = {10.3390/molecules30102107}
}
EUVIMED