Extraction, Preparation and Characterization of Nanocrystalline Cellulose from Lignocellulosic Simpor Leaf Residue
Molecules · 2025
DOI: 10.3390/molecules30071622 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, 2025. Verfasst von Ukashat Mamudu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Material Analysis and Metal Testing Department, National Metallurgical Development Centre, Jos PMB 2116, Nigeria. Hauptthemen laut MEDLINE: Lignin, Cellulose, Nanoparticles, Plant Leaves. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of Kazakhstan.
Abstract (Originalsprache)
In this study, α-cellulose was extracted from lignocellulosic simpor leaf residue as a sustainable alternative to conventional cellulose sources. The extraction process involved the removal of hemicellulose, lignin, and other phytocompounds using alkali (NaOH) treatment and bleaching with hydrogen peroxide (H2O2). The nanocrystalline cellulose (NCC) was isolated from α-cellulose using sulfuric acid hydrolysis treatment followed by ultrasonication. The extracted α-cellulose and isolated NCC were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and dynamic light scattering (DLS). The obtained results confirmed that the extracted NCC exhibited characteristic cellulose functional groups and a crystallinity index of 64.7%, indicating the effective removal of amorphous regions through sulfuric acid hydrolysis. The thermal stability of the extracted cellulose increased to 332 °C due to the elimination of extractives. DLS analysis showed that the extracted NCC exhibited high colloidal stability in polar solvents, characterized by a zeta potential of −70.8 mV and an average particle size of 251.7 nm. This study highlights an environmentally friendly approach for converting low-value biomass waste into high-value cellulose materials with potential applications in sustainable packaging, biomedical applications and composite reinforcement.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Material Analysis and Metal Testing Department, National Metallurgical Development Centre, Jos PMB 2116, Nigeria.
- Faculty of Physics and Technical Sciences, L. N. Gumilyov Eurasian National University, Astana 010008, Kazakhstan.
- Faculty of Integrated Technologies, Universiti Brunei Darussalam, Jalan Tungku Link, Gadong BE1410, Brunei.
- Centre for Advanced Material and Energy Sciences, Universiti Brunei Darussalam, Jalan Tungku Link, Gadong BE1410, Brunei.
ORCID-Profile: Lukman Ahmed Omeiza, Ren Chong Lim
Förderung
- Ministry of Science and Higher Education of Kazakhstan
Zitieren
APA
Mamudu, U., Kabyshev, A., Bekmyrza, K., Kuterbekov, K. A., Baratova, A., Omeiza, L. A., & Lim, R. C. (2025). Extraction, Preparation and Characterization of Nanocrystalline Cellulose from Lignocellulosic Simpor Leaf Residue. Molecules. https://doi.org/10.3390/molecules30071622
Vancouver
Mamudu U, Kabyshev A, Bekmyrza K, Kuterbekov KA, Baratova A, Omeiza LA, et al. Extraction, Preparation and Characterization of Nanocrystalline Cellulose from Lignocellulosic Simpor Leaf Residue. Molecules. 2025. doi:10.3390/molecules30071622
BibTeX
@article{Mamudu2025,
author = {Mamudu, Ukashat and Kabyshev, Asset and Bekmyrza, Kenzhebatyr and Kuterbekov, Kairat A and Baratova, Aliya and Omeiza, Lukman Ahmed and Lim, Ren Chong},
title = {Extraction, Preparation and Characterization of Nanocrystalline Cellulose from Lignocellulosic Simpor Leaf Residue},
journal = {Molecules},
year = {2025},
doi = {10.3390/molecules30071622}
}
EUVIMED