Facile Preparation of Flexible Phenolic-Silicone Aerogels with Good Thermal Stability and Fire Resistance
Molecules · 21.01.2025 · 30 (3) · 464
DOI: 10.3390/molecules30030464 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, online erschienen am 21.01.2025. Verfasst von Zengyue Su und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Textile and Engineering, TianGong University, Tianjin 300387, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Project of Key Laboratory of Fire Protection Technology for Industry and Public Building, Ministry of Emergency Management (MEM), China, Natural Science Foundation of Tianjin, Beijing Nova Program.
Abstract (Originalsprache)
A huge challenge is how to prepare flexible silicone aerogel materials with good flame retardancy, thermal stability, and hydrophobic properties. In this paper, resorcinol–formaldehyde was introduced into the silicone network composed of methyltrimethoxysilane (MTMS), phenyltriethoxysilane (PTES), and dimethyldimethoxysilane (DMDMS). Flexible hybrid aerogels with excellent thermal insulation, flame retardant, and hydrophobic properties were prepared by the sol–gel method and ambient pressure drying (APD), and the preparation process does not require long-term solvent exchange, only about 3 h of soaking and washing of the wet gel. The results show that the prepared phenolic-silicone aerogel has low density (0.093 g/cm3), low thermal conductivity (0.041 W/m·K), high flexibility, and compression fatigue resistance. The phenolic microspheres are bonded to the silicone skeleton to maintain the original flexibility. After 50% compression deformation, it returns to the original size normally, and there is no significant change in the stress of the sample after 50 compression cycles. Compared with pure silicone aerogels, the hybrid aerogels doped with phenolic have better char yield (65.28%) and higher decomposition temperature (609 °C). The hybrid aerogel sample has good flame-retardant properties, which can withstand alcohol lamp burning without being ignited. The micron-sized phenolic beads give the hybrid aerogels better hydrophobic properties, showing a higher static water contact angle (152°). The excellent thermal and mechanical properties mean that the hybrid aerogels prepared in this paper have good application prospects for aerospace, outdoor equipment, and other fields.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Textile and Engineering, TianGong University, Tianjin 300387, China.
- National Engineering Research Center of Functional Carbon Fiber Composition Materials, Beijing 100076, China.
- Aerospace Research Institute of Materials and Processing Technology, Beijing 100076, China.
- College of Fine Arts, Linyi University, Linyi 276000, China.
ORCID-Profile: Zhenrong Zheng
Förderung
- Open Project of Key Laboratory of Fire Protection Technology for Industry and Public Building, Ministry of Emergency Management (MEM), China
- Natural Science Foundation of Tianjin
- Beijing Nova Program
Zitieren
APA
Su, Z., Zheng, Z., Zuo, X., Luo, L., & Guo, Y. (2025). Facile Preparation of Flexible Phenolic-Silicone Aerogels with Good Thermal Stability and Fire Resistance. Molecules, 30(3), 464. https://doi.org/10.3390/molecules30030464
Vancouver
Su Z, Zheng Z, Zuo X, Luo L, Guo Y. Facile Preparation of Flexible Phenolic-Silicone Aerogels with Good Thermal Stability and Fire Resistance. Molecules. 2025;30(3):464. doi:10.3390/molecules30030464
BibTeX
@article{Su2025,
author = {Su, Zengyue and Zheng, Zhenrong and Zuo, Xiaobiao and Luo, Lijuan and Guo, Yaxin},
title = {Facile Preparation of Flexible Phenolic-Silicone Aerogels with Good Thermal Stability and Fire Resistance},
journal = {Molecules},
year = {2025},
volume = {30},
number = {3},
pages = {464},
doi = {10.3390/molecules30030464}
}
EUVIMED