Effect of the Addition of Inorganic Fillers on the Properties of Degradable Polymeric Blends for Bone Tissue Engineering
Molecules · 2024
DOI: 10.3390/molecules29163826 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, 2024. Verfasst von Stanisław Marecik und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomaterials and Composites, Faculty of Materials Science and Ceramics, AGH University of Krakow, Al. Mickiewicza 30, 30-059 Krakow, Po…. Hauptthemen laut MEDLINE: Tissue Engineering, Tissue Scaffolds. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Narodowa Agencja Wymiany Akademickiej, Department of Science and Technology, New Delhi, Ministry of Science and Higher Education.
Abstract (Originalsprache)
Bone tissue exhibits self-healing properties; however, not all defects can be repaired without surgical intervention. Bone tissue engineering offers artificial scaffolds, which can act as a temporary matrix for bone regeneration. The aim of this study was to manufacture scaffolds made of poly(lactic acid), poly(ε-caprolactone), poly(propylene fumarate), and poly(ethylene glycol) modified with bioglass, beta tricalcium phosphate (TCP), and/or wollastonite (W) particles. The scaffolds were fabricated using a gel-casting method and observed with optical and scanning electron microscopes. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR), differential scanning calorimetry (DSC), thermogravimetry (TG), wettability, and degradation tests were conducted. The highest content of TCP without W in the composition caused the highest hydrophilicity (water contact angle of 61.9 ± 6.3°), the fastest degradation rate (7% mass loss within 28 days), moderate ability to precipitate CaP after incubation in PBS, and no cytotoxicity for L929 cells. The highest content of W without TCP caused the highest hydrophobicity (water contact angle of 83.4 ± 1.7°), the lowest thermal stability, slower degradation (3% mass loss within 28 days), and did not evoke CaP precipitation. Moreover, some signs of cytotoxicity on day 1 were observed. The samples with both TCP and W showed moderate properties and the best cytocompatibility on day 4. Interestingly, they were covered with typical cauliflower-like hydroxyapatite deposits after incubation in phosphate-buffered saline (PBS), which might be a sign of their excellent bioactivity.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Biomaterials and Composites, Faculty of Materials Science and Ceramics, AGH University of Krakow, Al. Mickiewicza 30, 30-059 Krakow, Poland.
- Department of Rubber and Plastics Technology, Madras Institute of Technology Campus, Anna University, Chromepet, Chennai 600 044, Tamil Nadu, India.
- Department of Biotechnology, Golapbag Campus, University of Burdwan, Burdwan 713 104, West Bengal, India.
ORCID-Profile: Stanisław Marecik, Iwona Pudełko-Prażuch, Mareeswari Balasubramanian, Sundara Moorthi Ganesan, Suvro Chatterjee, Kinga Pielichowska, Ravichandran Kandaswamy, Elżbieta Pamuła
Förderung
- Narodowa Agencja Wymiany Akademickiej
- Department of Science and Technology, New Delhi
- Ministry of Science and Higher Education
- Polish National Agency for Academic Exchange
- AGH University of Krakow and by the Department of Science and Technology, New Delhi
- Laboratory of Electron Microscopy of the Faculty of Materials Science and Ceramics at AGH University of Krakow
Zitieren
APA
Marecik, S., Pudełko-Prażuch, I., Balasubramanian, M., Ganesan, S. M., Chatterjee, S., Pielichowska, K., Kandaswamy, R., & Pamuła, E. (2024). Effect of the Addition of Inorganic Fillers on the Properties of Degradable Polymeric Blends for Bone Tissue Engineering. Molecules. https://doi.org/10.3390/molecules29163826
Vancouver
Marecik S, Pudełko-Prażuch I, Balasubramanian M, Ganesan SM, Chatterjee S, Pielichowska K, et al. Effect of the Addition of Inorganic Fillers on the Properties of Degradable Polymeric Blends for Bone Tissue Engineering. Molecules. 2024. doi:10.3390/molecules29163826
BibTeX
@article{Marecik2024,
author = {Marecik, Stanisław and Pudełko-Prażuch, Iwona and Balasubramanian, Mareeswari and Ganesan, Sundara Moorthi and Chatterjee, Suvro and Pielichowska, Kinga and Kandaswamy, Ravichandran and Pamuła, Elżbieta},
title = {Effect of the Addition of Inorganic Fillers on the Properties of Degradable Polymeric Blends for Bone Tissue Engineering},
journal = {Molecules},
year = {2024},
doi = {10.3390/molecules29163826}
}
EUVIMED