EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Significance of Lignocellulosic Raw Materials on the Pore Structure of Activated Carbons Prepared by Steam Activation

Li Zhang, Songlin Zuo iD

Molecules · 05.07.2024 · 29 (13) · 3197

DOI: 10.3390/molecules29133197 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 05.07.2024. Verfasst von Li Zhang und 1 weiteren Autor:innen. Beteiligte Einrichtung: International Innovation Center for Forest Chemicals and Materials, College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, Chi…. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Five different lignocellulosic raw materials (coconut shells, Moso bamboo, sawtooth oak, Chinese fir, and Masson pine) were used to prepare activated carbons by steam activation at 850 °C to evaluate the effects of their structures on physical activation. The chemical compositions, botanic forms, and pore structures of the lignocellulose-based charcoal samples were systematically characterized by proximate and ultimate analyses, scanning electron microscopy, and mercury injection porosimetry. It was found that the rate of the activation reaction between charcoal and steam is determined by the porosity of the precursor. Pore structure results show that the steam activation of coconut shell and bamboo charcoals primarily produced micropores, thus yielding microporous activated carbon materials with just a few mesopores, even following a high burn-off of >66%. The steam activation of sawtooth oak charcoals produced mainly micropores at a low burn-off of 50%. The steam activation of Chinese fir and Masson pine charcoals produced mainly mesopores at a burn-off of 0–80%. These mesopores were remarkably broadened to >20 nm on extending the activation time, resulting in a high vitamin B12 (VB12) adsorption capacity of ~530 mg/g. In conclusion, the raw lignocellulosic materials used as precursors have a decisive effect on the development of pore structures in activated carbon materials obtained through physical activation.

Schlagwörter

Stichwörter der Autor:innen

activated carbonlignocellulosic materialssteam activationvitamin B12 adsorption

Autor:innen und Institutionen

  • International Innovation Center for Forest Chemicals and Materials, College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, China.
  • Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, China.

ORCID-Profile: Songlin Zuo

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, L., & Zuo, S. (2024). The Significance of Lignocellulosic Raw Materials on the Pore Structure of Activated Carbons Prepared by Steam Activation. Molecules, 29(13), 3197. https://doi.org/10.3390/molecules29133197

Vancouver

Zhang L, Zuo S. The Significance of Lignocellulosic Raw Materials on the Pore Structure of Activated Carbons Prepared by Steam Activation. Molecules. 2024;29(13):3197. doi:10.3390/molecules29133197

BibTeX
@article{Zhang2024,
  author = {Zhang, Li and Zuo, Songlin},
  title = {The Significance of Lignocellulosic Raw Materials on the Pore Structure of Activated Carbons Prepared by Steam Activation},
  journal = {Molecules},
  year = {2024},
  volume = {29},
  number = {13},
  pages = {3197},
  doi = {10.3390/molecules29133197}
}
Kostenlos starten →