Corrosion Inhibition Properties of Corrosion Inhibitors to under-Deposit Corrosion of X65 Steel in CO2 Corrosion Conditions
Molecules · 01.06.2024 · 29 (11) · 2611
DOI: 10.3390/molecules29112611 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, online erschienen am 01.06.2024. Verfasst von Hai Lin und 7 weiteren Autor:innen. Beteiligte Einrichtung: CCDC Drilling Engineering Technology Research Institute, Xi'an 710018, China. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Under-deposit corrosion is widely present in the pipelines of oil and gas production, causing significant corrosion damage. In this paper, a novel electrochemical cathodic-polarization method was carried out to accelerate the formation of CaCO3 scale on a X65 steel surface in a simulated solution containing scaling ions. Subsequently, pre-scaled X65 steel was placed in a high temperature and pressure autoclave to conduct corrosion weight-loss experiments and in situ electrochemical measurements. The study mainly compared the corrosion inhibition behavior of four quaternary ammonium salt corrosion inhibitors, pyridinium quaternary salt (BPC), quinolinium quaternary salt (BQC), 8-hydroxyquinolinium quaternary salt (BHQ) and pyridinium (1-chloromethyl naphthalene) quaternary salt (1-CPN), in a simulated oilfield scale under corrosive conditions. The results of the weight-loss experiments demonstrated that the inhibition efficiencies of the corrosion inhibitors from high to low were as follows: 1-CPN < BHQ < BQC < BPC. The in situ electrochemical measurements showed that the immersion time and type of corrosion inhibitor had a pronounced influence on the corrosion and corrosion inhibition behavior of X65 steel with CaCO3 coating. It was also proved using both EIS and PC that 1-CPN shows the best inhibition performance in all. Lastly, the inhibition mechanism of corrosion inhibitors at under-deposit conditions was analyzed via a surface morphology observation of SEM.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- CCDC Drilling Engineering Technology Research Institute, Xi'an 710018, China.
- National Engineering Laboratory for Exploration and Development of Low-Permeability Oil & Gas Fields, Xi'an 710018, China.
- CCDC Geological Exploration & Development Research Institute, Chengdu 610051, China.
- Gas Transmission Management Department, Southwest Oil & GasField Company, Petrochina, Chengdu 610215, China.
- School of Materials Science and Engineering, Southwest Petroleum University, Chengdu 610600, China.
ORCID-Profile: Jiayi Tang
Zitieren
APA
Lin, H., Chen, X., Luo, Z., Xu, J., Lu, P., Xie, T., Tang, J., & Wang, H. (2024). Corrosion Inhibition Properties of Corrosion Inhibitors to under-Deposit Corrosion of X65 Steel in CO2 Corrosion Conditions. Molecules, 29(11), 2611. https://doi.org/10.3390/molecules29112611
Vancouver
Lin H, Chen X, Luo Z, Xu J, Lu P, Xie T, et al. Corrosion Inhibition Properties of Corrosion Inhibitors to under-Deposit Corrosion of X65 Steel in CO2 Corrosion Conditions. Molecules. 2024;29(11):2611. doi:10.3390/molecules29112611
BibTeX
@article{Lin2024,
author = {Lin, Hai and Chen, Xiaorong and Luo, Zhongming and Xu, Jun and Lu, Ping and Xie, Tianyi and Tang, Jiayi and Wang, Hu},
title = {Corrosion Inhibition Properties of Corrosion Inhibitors to under-Deposit Corrosion of X65 Steel in CO2 Corrosion Conditions},
journal = {Molecules},
year = {2024},
volume = {29},
number = {11},
pages = {2611},
doi = {10.3390/molecules29112611}
}
EUVIMED