EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Biocompatible Electrospun PHBV-PLLA Polymeric Bilayer Composite Membranes for Skin Tissue Engineering Applications

Muddasar Jamal, Faiza Sharif, Muhammad Shozab Mehdi, Muhammad Fakhar-E-Alam, Muhammad Asif iD, Waleed Mustafa, Mustehsan Bashir, Sikandar Rafiq, Mohamad Azmi Bustam iD, Saif-Ur-Rehman iD, Kholood A Dahlous, Mohamed F Shibl iD und 1 weitere

Molecules · 2024

DOI: 10.3390/molecules29092049 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, 2024. Verfasst von Muddasar Jamal und 12 weiteren Autor:innen. Beteiligte Einrichtung: Interdisciplinary Research Centre in Biomedical Materials, COMSATS University Islamabad, Lahore Campus, Lahore 54000, Pakistan. Hauptthemen laut MEDLINE: Tissue Engineering, Biocompatible Materials, Polyesters, Skin. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: HEC, King Saud University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bilayer electrospun fibers aimed to be used for skin tissue engineering applications were fabricated for enhanced cell attachment and proliferation. Different ratios of PHBV-PLLA (70:30, 80:20, and 90:10 w/w) blends were electrospun on previously formed electrospun PHBV membranes to produce their bilayers. The fabricated electrospun membranes were characterized with FTIR, which conformed to the characteristic peaks assigned for both PHBV and PLLA. The surface morphology was evaluated using SEM analysis that showed random fibers with porous morphology. The fiber diameter and pore size were measured in the range of 0.7 ± 0.1 µm and 1.9 ± 0.2 µm, respectively. The tensile properties of the bilayers were determined using an electrodynamic testing system. Bilayers had higher elongation at break (44.45%) compared to the monolayers (28.41%) and improved ultimate tensile strength (7.940 MPa) compared to the PHBV monolayer (2.450 MPa). In vitro cytotoxicity of each of the scaffolds was determined via culturing MC3T3 (pre-osteoblastic cell line) on the membranes. Proliferation was evaluated using the Alamar Blue assay on days 3, 7, and 14, respectively. SEM images of cells cultured on membranes were taken in addition to bright field imaging to visually show cell attachment. Fluorescent nuclear staining performed with DAPI was imaged with an inverted fluorescent microscope. The fabricated bilayer shows high mechanical strength as well as biocompatibility with good cell proliferation and cell attachment, showing potential for skin substitute applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue EngineeringBiocompatible MaterialsPolyestersSkinCell ProliferationTissue ScaffoldsAnimalsMiceTensile StrengthMembranes, ArtificialCell LineMaterials TestingPolymersCell Adhesion

Stichwörter der Autor:innen

PHBVPLLAbilayer compositespolymeric membranesskin regeneration

Substanzen

Biocompatible MaterialsPolyesterspoly(lactide)Membranes, ArtificialPolymers

Autor:innen und Institutionen

  • Interdisciplinary Research Centre in Biomedical Materials, COMSATS University Islamabad, Lahore Campus, Lahore 54000, Pakistan.
  • Department of Chemical Engineering, COMSATS University Islamabad, Lahore Campus, Lahore 54000, Pakistan.
  • Department of Chemical Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar 32610, Perak, Malaysia.
  • Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Topi 23640, Pakistan.
  • Department of Physics, Government College University Faisalabad, Allama Iqbal Road, Faisalabad 38000, Pakistan.
  • Department of Plastic, Reconstructive Surgery and Burn Unit, King Edward Medical University, Lahore 54000, Pakistan.

ORCID-Profile: Muhammad Asif, Mohamad Azmi Bustam, Saif-Ur-Rehman, Mohamed F Shibl, Noora H Al-Qahtani

Förderung

  • HEC
  • King Saud University

Zitieren

APA

Jamal, M., Sharif, F., Shozab Mehdi, M., Fakhar-E-Alam, M., Asif, M., Mustafa, W., Bashir, M., Rafiq, S., Bustam, M. A., Saif-Ur-Rehman, Dahlous, K. A., Shibl, M. F., & Al-Qahtani, N. H. (2024). Development of Biocompatible Electrospun PHBV-PLLA Polymeric Bilayer Composite Membranes for Skin Tissue Engineering Applications. Molecules. https://doi.org/10.3390/molecules29092049

Vancouver

Jamal M, Sharif F, Shozab Mehdi M, Fakhar-E-Alam M, Asif M, Mustafa W, et al. Development of Biocompatible Electrospun PHBV-PLLA Polymeric Bilayer Composite Membranes for Skin Tissue Engineering Applications. Molecules. 2024. doi:10.3390/molecules29092049

BibTeX
@article{Jamal2024,
  author = {Jamal, Muddasar and Sharif, Faiza and Shozab Mehdi, Muhammad and Fakhar-E-Alam, Muhammad and Asif, Muhammad and Mustafa, Waleed and Bashir, Mustehsan and Rafiq, Sikandar and Bustam, Mohamad Azmi and Saif-Ur-Rehman and Dahlous, Kholood A and Shibl, Mohamed F and Al-Qahtani, Noora H},
  title = {Development of Biocompatible Electrospun PHBV-PLLA Polymeric Bilayer Composite Membranes for Skin Tissue Engineering Applications},
  journal = {Molecules},
  year = {2024},
  doi = {10.3390/molecules29092049}
}
Kostenlos starten →