EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Additives on CO2 Adsorption of Polyethylene Polyamine-Loaded MCM-41

Xia Wang iD, Wulan Zeng, Peidan Hu, Shengxin Liu, Yuechao Lin, Zhaowen He, Chunling Xin, Xiangjun Kong, Jinghan Xu

Molecules · 26.02.2024 · 29 (5) · 1006

DOI: 10.3390/molecules29051006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 26.02.2024. Verfasst von Xia Wang und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry and Chemical Engineering, Weifang University, Weifang 261061, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering, Weifang Science and Technology Development Plan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Organic amine-modified mesoporous carriers are considered potential CO2 sorbents, in which the CO2 adsorption performance was limited by the agglomeration and volatility of liquid amines. In this study, four additives of ether compounds were separately coimpregnated with polyethylene polyamine (PEPA) into MCM-41 to prepare the composite chemisorbents for CO2 adsorption. The textural pore properties, surface functional groups and elemental contents of N for MCM-41 before and after functionalization were characterized; the effects of the type and amount of additives, adsorption temperature and influent velocity on CO2 adsorption were investigated; the amine efficiency was calculated; and the adsorption kinetics and regeneration for the optimized sorbent were studied. For 40 wt.% PEPA-loaded MCM-41, the CO2 adsorption capacity and amine efficiency at 60 °C were 1.34 mmol/g and 0.18 mol CO2/mol N, when the influent velocity of the simulated flue gas was 30 mL/min, which reached 1.81 mmol/g and 0.23 mol CO2/mol N after coimpregnating 10 wt.% of 2-propoxyethanol (1E). The maximum adsorption capacity of 2.16 mmol/g appeared when the influent velocity of the simulated flue gas was 20 mL/min. In addition, the additive of 1E improved the regeneration and kinetics of PEPA-loaded MCM-41, and the CO2 adsorption process showed multiple adsorption routes.

Schlagwörter

Stichwörter der Autor:innen

CO2 adsorptionadditivechemisorptioncoimpregnationregeneration

Autor:innen und Institutionen

  • Department of Chemistry and Chemical Engineering, Weifang University, Weifang 261061, China.

ORCID-Profile: Xia Wang

Förderung

  • National Natural Science Foundation of China
  • State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering
  • Weifang Science and Technology Development Plan

Zitieren

APA

Wang, X., Zeng, W., Hu, P., Liu, S., Lin, Y., He, Z., Xin, C., Kong, X., & Xu, J. (2024). Effect of Additives on CO2 Adsorption of Polyethylene Polyamine-Loaded MCM-41. Molecules, 29(5), 1006. https://doi.org/10.3390/molecules29051006

Vancouver

Wang X, Zeng W, Hu P, Liu S, Lin Y, He Z, et al. Effect of Additives on CO2 Adsorption of Polyethylene Polyamine-Loaded MCM-41. Molecules. 2024;29(5):1006. doi:10.3390/molecules29051006

BibTeX
@article{Wang2024,
  author = {Wang, Xia and Zeng, Wulan and Hu, Peidan and Liu, Shengxin and Lin, Yuechao and He, Zhaowen and Xin, Chunling and Kong, Xiangjun and Xu, Jinghan},
  title = {Effect of Additives on CO2 Adsorption of Polyethylene Polyamine-Loaded MCM-41},
  journal = {Molecules},
  year = {2024},
  volume = {29},
  number = {5},
  pages = {1006},
  doi = {10.3390/molecules29051006}
}
Kostenlos starten →