Optimizing Analysis Methods: Rapid and Accurate Determination of Cuaminosulfate Residues with LC-MS/MS Based on Box–Behnken Design Study
Molecules · 2024
DOI: 10.3390/molecules29040794 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, 2024. Verfasst von Mingyuan He und 7 weiteren Autor:innen. Beteiligte Einrichtung: Guangxi SPR Technology Co., Ltd., Nanning 530000, China. Hauptthemen laut MEDLINE: Tandem Mass Spectrometry, Pesticide Residues. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
In view of the defects in the previous detection of cuaminosulfate, which only focused on the analysis of copper ions, there is currently no analysis method available to determine the actual state of cuaminosulfate as chelated or bound. In order to investigate the dissipation and terminal residues in soil and watermelon of cuaminosulfate for food safety and environmental risk, a highly effective technique was developed to detect cuaminosulfate residues in watermelon and soil, and field experiments were conducted in China. After single-factor experiments, residual cuaminosulfate in samples was extracted by pure water, purified using a liquid–liquid approach combined with a dispersive solid-phase extraction, and detected by liquid chromatography tandem mass spectrometry (LC-MS/MS). The Box–Behnken design (BBD) study was used to find the optimal solutions for the time of liquid–liquid purification, the amount of extraction solvent, and the amounts of cleanup sorbents for the analytical method. The average recovery of the method was in the range of 80.0% to 101.1%, the average relative standard deviation (RSD) was 5.3–9.9%, and the detection limit was lower than 0.05 mg/kg. The BBD study not only improved the extraction rate of the method, but also saved time and was operated easily. The final residues of cuaminosulfate in watermelon at different sampling intervals were all lower than 0.05 mg/kg under field conditions. The cuaminosulfate in soils dissipated following exponential kinetics, with half-life values in the range of 9.39 to 12.58 days, which varied by different locations. Based on the validated method, food safety residues and soil residues can be determined rapidly and accurately.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Guangxi SPR Technology Co., Ltd., Nanning 530000, China.
- State Key Laboratory for Biology of Plant Disease and Insect Pests, Institute of Plant Protection, Chinese Academy of Agricultural Sciences, Beijing 100193, China.
- State Key Laboratory of Elemento-Organic Chemistry, National Engineering Research Center of Pesticide, College of Chemistry, Nankai University, Tianjin 300071, China.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
He, M., Wang, Y., Zhang, L., Mao, L., Zhu, L., Zheng, Y., Liu, X., & Wu, C. (2024). Optimizing Analysis Methods: Rapid and Accurate Determination of Cuaminosulfate Residues with LC-MS/MS Based on Box–Behnken Design Study. Molecules. https://doi.org/10.3390/molecules29040794
Vancouver
He M, Wang Y, Zhang L, Mao L, Zhu L, Zheng Y, et al. Optimizing Analysis Methods: Rapid and Accurate Determination of Cuaminosulfate Residues with LC-MS/MS Based on Box–Behnken Design Study. Molecules. 2024. doi:10.3390/molecules29040794
BibTeX
@article{He2024,
author = {He, Mingyuan and Wang, Yuzhu and Zhang, Lan and Mao, Liangang and Zhu, Lizhen and Zheng, Yongquan and Liu, Xingang and Wu, Chi},
title = {Optimizing Analysis Methods: Rapid and Accurate Determination of Cuaminosulfate Residues with LC-MS/MS Based on Box–Behnken Design Study},
journal = {Molecules},
year = {2024},
doi = {10.3390/molecules29040794}
}
EUVIMED