EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Catalytic Soot Oxidation over Co-Based Metal Oxides: Effects of Transition Metal Doping

Jianbin Luo, Xinbo Zhu, Zhiwei Zhong, Geng Chen, Yu Hong, Zijian Zhou

Molecules · 20.12.2023 · 29 (1) · 41

DOI: 10.3390/molecules29010041 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 20.12.2023. Verfasst von Jianbin Luo und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Maritime and Transportation, Ningbo University, Ningbo 315211, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A series of Co-M (M = Fe, Cr, and Mn) catalysts were synthesized by the sol-gel method for soot oxidation in a loose contact mode. The Co-Fe catalyst exhibited the best catalytic activity among the tested samples, with the characteristic temperatures (T10, T50, and T90) of 470 °C, 557 °C, and 602 °C, respectively, which were 57 °C, 51 °C, and 51 °C lower than those of the CoOx catalyst. Catalyst characterizations of N2 adsorption–desorption, X-ray diffraction (XRD), X-ray photo-electron spectrometry (XPS), and the temperature programmed desorption of O2 (O2-TPD) were performed to gain insights into the relationships between the activity of catalytic soot oxidation and the catalyst properties. The content of Co2+ (68.6%) increased due to the interactions between Co and Fe, while the redox properties and the relative concentration of surface oxygen adsorption (51.7%) were all improved, which could significantly boost the activity of catalytic soot oxidation. The effects of NO and contact mode on soot oxidation were investigated over the Co-Fe catalyst. The addition of 1000 ppm of NO led to significant reductions in T10, T50, and T90 by 92 °C, 106 °C, and 104 °C, respectively, compared to the case without the NO addition. In the tight contact mode, the soot oxidation was accelerated over the Co-Fe catalyst, resulting in 46 °C, 50 °C, and 50 °C reductions in T10, T50, and T90 compared to the loose contact mode. The comparison between real soot and model Printex-U showed that the T50 value of real soot (455 °C) was 102 °C lower than the model Printex-U soot.

Schlagwörter

Stichwörter der Autor:innen

Co-based catalystNOcontact modereal sootsoot oxidation

Autor:innen und Institutionen

  • Faculty of Maritime and Transportation, Ningbo University, Ningbo 315211, China.
  • New Materials Institute, University of Nottingham Ningbo China, Ningbo 315100, China.
  • State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan 430074, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Luo, J., Zhu, X., Zhong, Z., Chen, G., Hong, Y., & Zhou, Z. (2023). Enhanced Catalytic Soot Oxidation over Co-Based Metal Oxides: Effects of Transition Metal Doping. Molecules, 29(1), 41. https://doi.org/10.3390/molecules29010041

Vancouver

Luo J, Zhu X, Zhong Z, Chen G, Hong Y, Zhou Z. Enhanced Catalytic Soot Oxidation over Co-Based Metal Oxides: Effects of Transition Metal Doping. Molecules. 2023;29(1):41. doi:10.3390/molecules29010041

BibTeX
@article{Luo2023,
  author = {Luo, Jianbin and Zhu, Xinbo and Zhong, Zhiwei and Chen, Geng and Hong, Yu and Zhou, Zijian},
  title = {Enhanced Catalytic Soot Oxidation over Co-Based Metal Oxides: Effects of Transition Metal Doping},
  journal = {Molecules},
  year = {2023},
  volume = {29},
  number = {1},
  pages = {41},
  doi = {10.3390/molecules29010041}
}
Kostenlos starten →