Sustainable Recovery of Platinum Group Metals from Spent Automotive Three-Way Catalysts through a Biogenic Thiosulfate-Copper-Ammonia System
Molecules · 14.12.2023 · 28 (24) · 8078
DOI: 10.3390/molecules28248078 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, online erschienen am 14.12.2023. Verfasst von Mariacristina Compagnone und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering and Food Technologies, Wine and Agrifood Research Institute (IVAGRO), Faculty of Sciences, University of Cadiz, Pu…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Regional Government of Andalusia, Ministry of Universities, Spanish Ministry of Universities.
Abstract (Originalsprache)
This study explores an eco-friendly method for recovering platinum group metals from a synthetic automotive three-way catalyst (TWC). Bioleaching of palladium (Pd) using the thiosulfate-copper-ammonia leaching processes, with biogenic thiosulfate sourced from a bioreactor used for biogas biodesulfurization, is proposed as a sustainable alternative to conventional methods. Biogenic thiosulfate production was optimized in a gas-lift bioreactor by studying the pH (8–10) and operation modes (batch and continuous) under anoxic and microaerobic conditions for 35 d. The maximum concentration of 4.9 g S2O32− L−1 of biogenic thiosulfate was reached under optimal conditions (batch mode, pH = 10, and airflow rate 0.033 vvm). To optimize Pd bioleaching from a ground TWC, screening through a Plackett–Burman design determined that oxygen and temperature significantly affected the leaching yield negatively and positively, respectively. Based on these results, an optimization through an experimental design was performed, indicating the optimal conditions to be Na2S2O3 1.2 M, CuSO4 0.03 M, (NH4)2SO4 1.5 M, Na2SO3 0.2 M, pH 8, and 60 °C. A remarkable 96.2 and 93.2% of the total Pd was successfully extracted from the solid at 5% pulp density using both commercially available and biogenic thiosulfate, highlighting the method’s versatility for Pd bioleaching from both thiosulfate sources.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering and Food Technologies, Wine and Agrifood Research Institute (IVAGRO), Faculty of Sciences, University of Cadiz, Puerto Real, 11510 Cadiz, Spain.
- Department of Material Science, Metallurgical Engineering and Inorganic Chemistry, Institute of Research on Electron Microscopy and Materials (IMEYMAT), Faculty of Sciences, University of Cadiz, Puerto Real, 11510 Cadiz…
ORCID-Profile: Mariacristina Compagnone, José Joaquín González-Cortés, María Pilar Yeste, Domingo Cantero, Martín Ramírez
Förderung
- Regional Government of Andalusia
- Ministry of Universities
- Spanish Ministry of Universities
Zitieren
APA
Compagnone, M., González-Cortés, J. J., Pilar Yeste, M., Cantero, D., & Ramírez, M. (2023). Sustainable Recovery of Platinum Group Metals from Spent Automotive Three-Way Catalysts through a Biogenic Thiosulfate-Copper-Ammonia System. Molecules, 28(24), 8078. https://doi.org/10.3390/molecules28248078
Vancouver
Compagnone M, González-Cortés JJ, Pilar Yeste M, Cantero D, Ramírez M. Sustainable Recovery of Platinum Group Metals from Spent Automotive Three-Way Catalysts through a Biogenic Thiosulfate-Copper-Ammonia System. Molecules. 2023;28(24):8078. doi:10.3390/molecules28248078
BibTeX
@article{Compagnone2023,
author = {Compagnone, Mariacristina and González-Cortés, José Joaquín and Pilar Yeste, María and Cantero, Domingo and Ramírez, Martín},
title = {Sustainable Recovery of Platinum Group Metals from Spent Automotive Three-Way Catalysts through a Biogenic Thiosulfate-Copper-Ammonia System},
journal = {Molecules},
year = {2023},
volume = {28},
number = {24},
pages = {8078},
doi = {10.3390/molecules28248078}
}
EUVIMED