EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of pH Value on the Microstructure and Properties of Strontium Phosphate Chemical Conversion Coatings on Titanium

Guochao Gu iD, Yibo Li iD, Kangqing Zuo, Guiyong Xiao iD

Molecules · 16.09.2023 · 28 (18) · 6651

DOI: 10.3390/molecules28186651 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 16.09.2023. Verfasst von Guochao Gu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, Jinan 250061, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program of Shandong Province, Department of Science and Technology of Shandong Province, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Strontium (Sr) is a trace element in the human body that can promote bone formation and inhibit bone absorption. A conversion coating of strontium phosphate (Sr-P) on the surface of titanium (Ti) can improve its biological properties and has many potential applications in the fields of dentistry and orthopedics. In the present study, Sr-P coatings with SrHPO4 and Sr3(PO4)2 crystals on Ti are prepared by a phosphate chemical conversion (PCC) treatment and the effect of pH values on the properties of the Sr-P coatings is researched. The results prove that the phase composition, morphology, and corrosion resistance of the coated Ti vary according to the pH values of the PCC solution. The morphology of the conversion deposition on Ti changes from plat-like to cluster-like and then to homogeneous microcrystals as the pH value changes from 2.50 to 3.25. Only discrete SrHPO4 crystals are generated on the substrate at lower pH values, while relatively stable Sr3(PO4)2 and SrHPO4 crystals grow and subsequently form an integrated coating on the Ti as the pH exceeds 2.50. The cross-sectional morphologies and bonding strength of different coatings are also researched. The corrosion resistance of coated Ti improves compared with that of bare Ti because of the Sr-P coatings with a Sr3(PO4)2 phase. In addition, it is indicated that the Sr-P coatings on Ti can improve the adhesion and differentiation of BMSCs.

Schlagwörter

Stichwörter der Autor:innen

coatingphosphate chemical conversionstrontium phosphatetitanium

Autor:innen und Institutionen

  • Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, Jinan 250061, China.
  • School of Materials Science and Engineering, Shandong University, Jinan 250061, China.

ORCID-Profile: Guochao Gu, Yibo Li, Guiyong Xiao

Förderung

  • Key Research and Development Program of Shandong Province
  • Department of Science and Technology of Shandong Province
  • National Natural Science Foundation of China
  • Natural Science Foundation of Shandong Province

Zitieren

APA

Gu, G., Li, Y., Zuo, K., & Xiao, G. (2023). The Influence of pH Value on the Microstructure and Properties of Strontium Phosphate Chemical Conversion Coatings on Titanium. Molecules, 28(18), 6651. https://doi.org/10.3390/molecules28186651

Vancouver

Gu G, Li Y, Zuo K, Xiao G. The Influence of pH Value on the Microstructure and Properties of Strontium Phosphate Chemical Conversion Coatings on Titanium. Molecules. 2023;28(18):6651. doi:10.3390/molecules28186651

BibTeX
@article{Gu2023,
  author = {Gu, Guochao and Li, Yibo and Zuo, Kangqing and Xiao, Guiyong},
  title = {The Influence of pH Value on the Microstructure and Properties of Strontium Phosphate Chemical Conversion Coatings on Titanium},
  journal = {Molecules},
  year = {2023},
  volume = {28},
  number = {18},
  pages = {6651},
  doi = {10.3390/molecules28186651}
}
Kostenlos starten →