Anisotropic Mechanical Properties of Orthorhombic SiP2 Monolayer: A First-Principles Study
Molecules · 08.09.2023 · 28 (18) · 6514
DOI: 10.3390/molecules28186514 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, online erschienen am 08.09.2023. Verfasst von Yinlong Hou und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Automation, Xi'an University of Posts & Telecommunications, Xi'an 710121, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shaanxi Provincial Department of Science and Technology project, Natural Science Foundation of Jiangsu, National Natural Science Foundation of China (NNSFC).
Abstract (Originalsprache)
In recent years, the two-dimensional (2D) orthorhombic SiP2 flake has been peeled off successfully by micromechanical exfoliation and it exhibits an excellent performance in photodetection. In this paper, we investigated the mechanical properties and the origin of its anisotropy in an orthorhombic SiP2 monolayer through first-principles calculations, which can provide a theoretical basis for utilizing and tailoring the physical properties of a 2D orthorhombic SiP2 in the future. We found that the Young’s modulus is up to 113.36 N/m along the a direction, while the smallest value is only 17.46 N/m in the b direction. The in-plane anisotropic ratio is calculated as 6.49, while a similar anisotropic ratio (~6.55) can also be observed in Poisson’s ratio. Meanwhile, the in-plane anisotropic ratio for the fracture stress of the orthorhombic SiP2 monolayer is up to 9.2. These in-plane anisotropic ratios are much larger than in black phosphorus, ReS2, and biphenylene. To explain the origin of strong in-plane anisotropy, the interatomic force constants were obtained using the finite-displacement method. It was found that the maximum of interatomic force constant along the a direction is 5.79 times of that in the b direction, which should be considered as the main origin of the in-plane anisotropy in the orthorhombic SiP2 monolayer. In addition, we also found some negative Poisson’s ratios in certain specific orientations, allowing the orthorhombic SiP2 monolayer to be applied in next-generation nanomechanics and nanoelectronics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Automation, Xi'an University of Posts & Telecommunications, Xi'an 710121, China.
- School of Mechanical and Electronic Engineering, Nanjing Forestry University, Nanjing 210042, China.
- School of Automation and Information Engineering, Xi'an University of Technology, Xi'an 710048, China.
ORCID-Profile: Kai Ren
Förderung
- Shaanxi Provincial Department of Science and Technology project
- Natural Science Foundation of Jiangsu
- National Natural Science Foundation of China (NNSFC)
- Shaanxi Provincial Department of Education Project
Zitieren
APA
Hou, Y., Ren, K., Wei, Y., Yang, D., Cui, Z., & Wang, K. (2023). Anisotropic Mechanical Properties of Orthorhombic SiP2 Monolayer: A First-Principles Study. Molecules, 28(18), 6514. https://doi.org/10.3390/molecules28186514
Vancouver
Hou Y, Ren K, Wei Y, Yang D, Cui Z, Wang K. Anisotropic Mechanical Properties of Orthorhombic SiP2 Monolayer: A First-Principles Study. Molecules. 2023;28(18):6514. doi:10.3390/molecules28186514
BibTeX
@article{Hou2023,
author = {Hou, Yinlong and Ren, Kai and Wei, Yu and Yang, Dan and Cui, Zhen and Wang, Ke},
title = {Anisotropic Mechanical Properties of Orthorhombic SiP2 Monolayer: A First-Principles Study},
journal = {Molecules},
year = {2023},
volume = {28},
number = {18},
pages = {6514},
doi = {10.3390/molecules28186514}
}
EUVIMED