Electrospun Fibrous Materials with Propolis Extracts for Edible Food Packagings
Molecules · 2023
DOI: 10.3390/molecules28145497 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, 2023. Verfasst von Zane Zelca und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Design Technology, Faculty of Materials Science and Applied Chemistry, Riga Technical University, LV-1048 Riga, Latvia. Hauptthemen laut MEDLINE: Propolis, Edible Films. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund.
Abstract (Originalsprache)
In this study, propolis additives provide antibacterial and antifungal effects that prolong the product’s shelf life. The aim of the study is to obtain homogeneous fiber membranes of polyvinyl alcohol and propolis by the electrospinning method and to evaluate their suitability for food packaging. Three propolis extracts are used in the study—water, ethyl alcohol, and glycerin-based. The membranes’ morphology and fiber diameter distribution, tensile deformation, air permeability, thermogravimetric analysis, differential scanning calorimetry, Fourier-transform infrared spectroscopy, and microbiological tests (Listeria monocytogenes, Salmonella enteritidis, Escherichia coli) were analyzed for electrospun samples. The results of the study show that propolis extracts are incorporated into membranes and the additive provides an antimicrobial effect with the contact surface. The obtained membranes are breathable: gas exchange can be controlled by using a material of appropriate thickness (air permeability coefficient is 0.046 and 0.276 mm/s). The mechanical properties of membranes are affected by moisture, but tensile strength can be improved with thermal post-processing at 100 °C. The propolis-containing fibers’ diameters are from 293 ± 8 to 664 ± 11 nm. Depending on membranes’ demonstrated properties, it can be concluded that the composites have the potential to increase the shelf life of fresh fruits and berries.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Institute of Design Technology, Faculty of Materials Science and Applied Chemistry, Riga Technical University, LV-1048 Riga, Latvia.
- Institute of Polymer Materials, Faculty of Materials Science and Applied Chemistry, Riga Technical University, LV-1048 Riga, Latvia.
- Laboratory of Polymers and Textile Technology, Department of Materials and Environmental Technology, Tallinn University of Technology, 19086 Tallinn, Estonia.
ORCID-Profile: Zane Zelca, Remo Merijs-Meri, Andres Krumme
Förderung
- European Regional Development Fund
Zitieren
APA
Zelca, Z., Merijs-Meri, R., Krumme, A., & Bernava, A. (2023). Electrospun Fibrous Materials with Propolis Extracts for Edible Food Packagings. Molecules. https://doi.org/10.3390/molecules28145497
Vancouver
Zelca Z, Merijs-Meri R, Krumme A, Bernava A. Electrospun Fibrous Materials with Propolis Extracts for Edible Food Packagings. Molecules. 2023. doi:10.3390/molecules28145497
BibTeX
@article{Zelca2023,
author = {Zelca, Zane and Merijs-Meri, Remo and Krumme, Andres and Bernava, Aina},
title = {Electrospun Fibrous Materials with Propolis Extracts for Edible Food Packagings},
journal = {Molecules},
year = {2023},
doi = {10.3390/molecules28145497}
}
EUVIMED